S116S01 Datasheet, PDF (1/13 Pages) Sharp Electrionic Components – Triac output SSR

S116S01 Series
S216S01 Series
∗_{Zero cross type is also available. (S116S02 Series/}
S216S02 Series)
S116S01 Series
S216S01 Series
IT(rms)≤16A, Non-Zero Cross type
SIP 4pin
Triac output SSR
■ Description
S116S01 Series and S216S01 Series Solid State
Relays (SSR) are an integration of an infrared emitting
diode (IRED), a Phototriac Detector and a main output
Triac. These devices are ideally suited for controlling
high voltage AC loads with solid state reliability while
providing 4.0kV isolation (V_iso(rms)) from input to out-
put.
■ Features
1. Output current, IT(rms)≤16.0A
2. Non-zero crossing functionary
3. 4 pin SIP package
4. High repetitive peak off-state voltage
(VDRM : 600V, S216S01 Series)
(VDRM : 400V, S116S01 Series)
5. High isolation voltage between input and output
(Viso(rms) : 4.0kV)
6. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
7. Screw hole for heat sink
■ Agency approvals/Compliance
1. Recognized by UL508 (only for S116S01 Series), file
No. E94758 (as models No. S116S01)
2. Approved by CSA 22.2 No.14 (only for S116S01 Ser-
ies), file No. LR63705 (as models No. S116S01)
3. Package resin : UL flammability grade (94V-0)
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Phase or power control in applications such as light-
ing and temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D4-A02601EN
1
Date Apr. 28. 2004
© SHARP Corporation