S101S06F Datasheet, PDF (1/13 Pages) Sharp Electrionic Components – Non-zero cross type is also available. (S101S05V Series)

S101S06V Series
S201S06V Series
S101S06V Series
S201S06V Series
∗_{Non-zero cross type is also available. (S101S05V Series)}
IT(rms)≤3A, Zero Cross type
SIP 4pin
Triac output SSR
■ Description
S101S06V Series and S201S06V Series Solid
State Relays (SSR) are an integration of an infrared
emitting diode (IRED), a Phototriac Detector and a
main output Triac. These devices are ideally suited for
controlling high voltage AC loads with solid state
reliability while providing 3.0kV isolation (V_iso(rms))
from input to output.
■ Features
1. Output current, IT(rms)≤3.0A
2. Zero crossing functionary (VOX : MAX. 35V)
3. 4 pin SIP package
4. High repetitive peak off-state voltage
(VDRM : 600V, S201S06V Series)
(VDRM : 400V, S101S06V Series)
5. High isolation voltage between input and output
(Viso(rms) : 3.0kV)
6. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
7. Screw hole for heat sink
■ Agency approvals/Compliance
1. Recognized by UL508, file No. E94758 (as models No.
S101S06V/S201S06V)
2. Approved by CSA 22.2 No.14, file No. LR63705 (as
models No. S101S06V/S201S06V)
3. Package resin : UL flammability grade (94V-0)
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Power control in applications such as lighting and
temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.:D4-A02201EN
1
Date Apr. 28. 2004
© SHARP Corporation