PR36MF22NSZ Datasheet, PDF (1/3 Pages) Sharp Electrionic Components – 8-Pin DIP Type SSR for Low Power Control

PR36MF22NSZ/PR39MF22NSZ
PR36MF22NSZ/
PR39MF22NSZ
I Features
1. Compact 8-pin dual-in-line package type.
2. RMS ON-state current IT(rms):0.6A, 0.9A
3. Built-in zero-cross circuit.
4. High repetitive peak OFF-state voltage.
(VDRM:MIN. 600V)
5. Isolation voltage between input and output.
(Viso(rms):4kV)
6. Under preparation for UL and CSA.
I Applications
1. Various types of home appliances
I Model Line-up
RMS ON-state current (rms)
0.6A
0.9A
Model No.
PR36MF22NSZ
PR39MF22NSZ
I Absolute Maximum Ratings
Parameter
*1_{Forward current}
Reverse voltage
*1_{RMS ON-state PR36MF22NSZ}
current PR39MF22NSZ
Symbol
I_F
VR
IT (rms)
Rating
50
6
0.6
0.9
(T_a=25°C)
Unit
mA
V
A
*2_{Peak one cycle PR36MF22NSZ}
surge current PR39MF22NSZ
Isurge
6
9
A
Repetitive peak
OFF-state voltage
V_DRM
600
V
*3 _{Isolation voltage}
Viso (rms)
4.0
kV
Operating temperature
Topr −30 to +85 °C
Storage temperature
Tstg −40 to +125 °C
Soldering temperature
Tsol 260 (For 10s) °C
*1 The derating factors of absolute maximum ratings due to ambient temperature are
shown in Fig.1, 2
*2 50Hz sine wave
*3 AC for 1 min, 40 to 60%RH, f=60Hz
8-Pin DIP Type SSR for Low
Power Control
I Outline Dimensions
2.54^±0.25
Anode
mark
8
65
A
123
9.66^±0.5
4 _1.2±0.3
(Unit : mm)
A (Model No.)
7.62^±0.3
0.5^±0.1
0.26^±0.1
θ:0 to 13˚
θ
Internal connection Diagram
8
65
Zero-cross
circuit
1 23 4
1 Cathode
2 Anode
3 Cathode
4 Cathode
5G
6 T₁
8 T₂
Terminal 1 , 3 and 4 are common ones of cathode.To radiate the
heat, solder all of the lead pins on the pattern of PWB.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/