PR29MF11NSZ Datasheet, PDF (1/6 Pages) Sharp Electrionic Components – 8-Pin DIP Type SSR for Low Power Control

PR29MF11NSZ Series/PR39MF11NSZ Series
PR29MF11NSZ Series/ 8-Pin DIP Type SSR for Low
Power Control
PR39MF11NSZ Series
s Features
1. Compact 8-pin dual-in-line package type
2. RMS ON-state current IT(rms):0.9A
3. Built-in zero-cross circuit
(PR29MF21NSZ/PR39MF21NSZ)
4. High repetitive peak OFF-state voltage
PR29MF11NSZ/PR29MF21NSZ VDRM:MIN. 400V
PR39MF11NSZ/PR39MF21NSZ VDRM:MIN. 600V
5. Isolation voltage between input and output
(Viso(rms):4kV)
6. Recognized by UL, file No. E94758
(PR29MF11NSZ/PR39MF11NSZ)
7. Approved by CSA No. LR63705
(PR29MF11NSZ/PR39MF11NSZ)
8. PR29MF21NSZ/PR39MF21NSZ:under preparation
s Applications
for UL and CSA
1. Various types of home appliances
s Model Line-up
No built-in zero-
cross circuit
Built-in zero-
cross circuit
For 100V line
For 200V line
PR29MF11NSZ PR39MF11NSZ
PR29MF21NSZ PR39MF21NSZ
s Outline Dimensions
2.54^±0.25
Anode
mark
8
65
A
123
9.66^±0.5
4 _1.2±0.3
(Unit : mm)
A (Model No.)
R29MF1
R29MF2
R36MF1
R36MF2
7.62^±0.3
0.5^±0.1
0.26^±0.1
θ:0 to 13˚
θ
❈Zero-cross circuit for (PR29MF21NSZ/PR39MF21NSZ)
Internal connection Diagram
PR29MF11NSZ/
PR39MF11NSZ
8
65
PR29MF21NSZ/
PR39MF21NSZ
8
65
1 23 4
❈
Zero-cross
circuit
1 23 4
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
Input ^{*1 Forward current}
IF
Reverse voltage
VR
50
mA
6
V
*1 _{RMS ON-state current}
IT (rms)
0.9
A
Peak one cycle surge current Isurge 9 (50Hz sine wave) A
Output ^{Repetitive PR29MF11NSZ}
400
peak PR29MF21NSZ
OFF-state _PR39MF11NSZ ^VDRM
V
voltage _PR39MF21NSZ
600
*2 _{Isolation voltage Viso (rms)}
4.0
kV
PR29MF11NSZ
−25 to +85
Operating PR39MF11NSZ
temperature _PR29MF21NSZ ^Topr
−30 to +85
°C
PR39MF21NSZ
Storage temperature
Soldering temperature
Tstg −40 to +125 °C
Tsol 260 (For 10s) °C
*1 The derating factors of absolute maximum ratings due to ambient temperature are
shown in Fig.1, 2
*2 AC for 1 min, 40 to 60%RH, f=60Hz
1 Cathode
2 Anode
3 Cathode
4 Cathode
5G
6 T₁
8 T₂
Terminal 1 , 3 and 4 are common ones of cathode.To radiate the
heat, solder all of the lead pins on the pattern of PWB.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/