PR21HD22NSZ Datasheet, PDF (1/13 Pages) Sharp Electrionic Components – IT(rms) 1.5A, Low trigger current Zero Cross type Zero Cross type Triac output SSR

PR21HD22NSZ Series
PR31HD22NSZ Series
PR21HD22NSZ Series IT(rms)≤1.5A, Low trigger current
Zero Cross type
PR31HD22NSZ Series
DIP 16pin
Triac output SSR
■ Description
PR21HD22NSZ Series and PR31HD22NSZ Series
Solid State Relays (SSR) are an integration of an
infrared emitting diode (IRED), a Phototriac Detector
and a main output Triac. These devices are ideally
suited for controlling high voltage AC loads with solid
state reliability while providing 4.0kV isolation
(V_iso(rms)) from input to output.
■ Features
1. Output current, IT(rms)≤1.5A
2. Zero crossing functionary
3. 16 pin DIP package
4. Low minimum trigger current (IFT : MAX.5mA)
5. High repetitive peak off-state voltage
(VDRM : 600V, PR31HD22NSZ Series)
(VDRM : 400V, PR21HD22NSZ Series)
6. Superior noise immunity (dV/dt : MIN. 100V/µs)
7. Response time, ton : MAX. 100µs
8. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
9. High isolation voltage between input and output
(Viso(rms) : 4.0kV)
■ Agency approvals/Compliance
1. Package resin : UL flammability grade (94V-0)
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Power control in applications such as lighting and
temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D4-A01401EN
1
Date Mar. 31. 2004
© SHARP Corporation