PQXXXDNA1ZPH Datasheet, PDF (1/6 Pages) Sharp Electrionic Components – Compact Surface Mount type Low Power-Loss Voltage Regulators

PQxxxDNA1ZPH Series
PQxxxDNA1ZPH Series
Compact Surface Mount type
Low Power-Loss Voltage Regulators
Features
1.Output current : 1A
2.High isolation voltage VIN:MAX.24 V
3.Low dissipation current
(Dissipation current at no load: MAX. 8mA
Output OFF-state dissipation current: MAX.5μA)
4.Built-in ON/OFF function
5.Built-in overcurrent and overheat protection functions
6.Built-in ASO protection function
7.Ceramic capacitor compatible
8.RoHS directive compliant
Applications
1.AV equipment
2.OA equipment
Model Line-up
Output Voltage
(TYP.)
Model No.
3.3V
5.0V
8.0V
9.0V
12.0V
PQ033DNA1ZPH
PQ050DNA1ZPH
PQ080DNA1ZPH
PQ090DNA1ZPH
PQ120DNA1ZPH
Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
*1 _{Input voltage}
VIN
24
V
*1_{Output control voltage VC}
24
V
Output current
IO
1
A
*2 _{Power dissipation}
PD
8
W
*3 _{Junction temperature}
Tj
150
°C
Operating temperature Topr
Storage temperature
Tstg
-40 to +85 °C
-40 to +150 °C
Soldering temperature Tsol
260(10s) °C
*1 All are open except GND and applicable terminals.
*2 PD: With infinite heat sink
*3 Overheat protection may operate at Tj:125°C to 150°C
■ Outline Dimensions
(Unit : mm)
6.6^MAX.
5.2^±0.5
050DNA1
3
Epoxy resin
Lead finish
identification mark
2.1^±0.5
(0.3)
H
(0～0.25)
0.3
+0.2
-0.1
4-(1.27)
(0.3)
12
45
( ) : Typical dimensions
Product mass:(0.2g)
1
3
Specific IC
2
5
1 DC input (VIN)
2 ON/OFF control terminal (VC)
3 DC output(VO)
4 NC
5 GND
Lead finish:Lead-free solder plating
(Composition: Sn2Cu)
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP06051
1