PQ200WN3MZPH Datasheet, PDF (1/6 Pages) Sharp Electrionic Components – Compact Surface Mount type Low Power-Loss Voltage Regulators

PQ200WN3MZPH
PQ200WN3MZPH
Compact Surface Mount type
Low Power-Loss Voltage Regulators
Features
1.Output current : 300mA
2.High isolation voltage VIN:MAX.24 V
3.Low dissipation current
(Dissipation current at no load: MAX. 8mA
Output OFF-state dissipation current: MAX.5μA)
4.Built-in ON/OFF function
5.Built-in overcurrent and overheat protection functions
6.Built-in ASO protection function
7.Ceramic capacitor compatible
8.RoHS directive compliant
Applications
1.FPD-TV
2.DVD-Recorder
3.Digital STB
Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
*1 _{Input voltage}
VIN
24
V
*1_{Output control voltage}
VC
24
V
*1_{Output adjustment pin voltage Vadj}
5
V
*2 _{Power dissipation}
PD
6.8
W
*3 _{Junction temperature}
Tj
150
°C
Operating temperature Topr -40 to +85 °C
Storage temperature
Tstg -40 to +150 °C
Soldering temperature Tsol
260(10s) °C
*1 All are open except GND and applicable terminals.
*2 PD: With infinite heat sink
*3 There is case that overheat protection function operates at the temperature
Tj:110°C or more,so this item cannot be used in this temperature range.
■ Outline Dimensions
(Unit : mm)
6.6^MAX.
5.2^±0.5
200WN3M
3
Epoxy resin
Lead finish
identification mark
2.1^±0.5
(0.3)
H
(0～0.25)
0.3
+0.2
-0.1
4-(1.27)
(0.3)
12
45
( ) : Typical dimensions
Product mass:(0.23g)
1
3
Specific IC
2
4
5
1 DC input (VIN)
2 ON/OFF control terminal (VC)
3 DC output(VO)
4 Output voltage adjustment(Vadj)
5 GND
Lead finish:Lead-free solder plating
(Composition: Sn2Cu)
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP06076
1