PQ1NXX3MXSPQ Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Compact Surface Mount Type Compact Surface Mount Type

PQ1Nxx3MxSPQ Series
PQ1Nxx3MxSPQ Series
Compact Surface Mount Type
Low Power-Loss Voltage Regulators
Features
1.Compact surface mount package (4.5×4.3×1.5mm)
2.Output current : MAX.350mA
3.Power dissipation : MAX.900mW
4.Low power-loss
(Dropout voltage : MAX. 0.7V at IO=350mA)
5.Built-in reset signal generating function
6.Built-in overcurrent, overheat protection functions
7.Use of ceramic capacitor is possible as output
smooth capacitor
8.RoHS directive compliant
Applications
1.Optical disk drive
2.DVD player
Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
*1 _{Input voltage}
VIN
9
V
*1 _{Reset output voltage}
Vr
9
V
Output current
IO
*1_{Reset output current}
Ir
*2 _{Power dissipation}
PD
*3 _{Junction temperature}
Tj
350
mA
5
mA
900
mW
150
°C
Operating temperature Topr
Storage temperature
Tstg
-30 to +85 °C
-55 to +150 °C
Soldering temperature Tsol
270(10s) °C
*1 All are open except GND and applicable terminals.
*2 At surface-mounted condition
*3 Overheat protection may operate at Tj:125°C to 150°C
■ Outline Dimensions
(Unit : mm)
0.42 ^±0.1
5
1.6 ^±0.2
0.42 ^±0.1
2
0.42 ^±0.1
Lead finish
identification mark
0.4^±0.05
4
1
0.42 ^±0.1
2
0.47 ^±0.1
4.5 ^±0.2
3
0.42 ^±0.1
Lot No.(OLD DIN standard)
1.5 ^±0.2
1.5 ^±0.2
Product mass:0.055g
Internal connection
4
5
Control
circuit
3
2
① Reset output voltage (Vr)
② GND
③ Delay time setting (Cd)
1
④ DC input (Vin)
⑤ DC output (VO)
Lead finish:Lead-free solder plating
(Composition: Sn2Bi)
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP06045
1