PQ1MXX5M2SPQ Datasheet, PDF (1/4 Pages) Sharp Electrionic Components – Compact Surface Mount Type Low Power-Loss Voltage Regulators

PQ1Mxx5M2SPQ Series
PQ1Mxx5M2SPQ Series
Compact Surface Mount Type
Low Power-Loss Voltage Regulators
Features
1.Compact surface mount package (4.5×4.3×1.5mm)
2.Output current : MAX.500mA
3.Power dissipation : MAX.900mW
(At mounting PCB shown in Fig.3)
4.Low power-loss
(Dropout voltage : MAX. 0.7V at IO=500mA)
5.High ripple rejection(TYP.65dB)
6.Built-in ON/OFF control function
7.Built-in overcurrent, overheat protection functions
8.Use of ceramic capacitor is possible as output
smooth capacitor
9.RoHS directive compliant
Applications
1.CD-ROM drives
2.DVD-ROM drives
3.Digital Still Cameras
Model Line-up
Output Voltage
(TYP.)
Model No.
1.5V
1.8V
2.5V
PQ1M155M2SPQ
PQ1M185M2SPQ
PQ1M255M2SPQ
3.3V
5.0V
PQ1M335M2SPQ
PQ1M505M2SPQ
Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
*1 _{Input voltage}
VIN
9
V
*1 _{ON/OFF control terminal voltage VC}
9
V
Output current
IO
500
mA
*2 _{Power dissipation}
PD
900
mW
*3 _{Junction temperature}
Tj
150
°C
Operating temperature Topr
Storage temperature
Tstg
-30 to +85 °C
-55 to +150 °C
Soldering temperature Tsol
270(10s) °C
*1 All are open except GND and applicable terminals.
*2 At surface-mounted condition
*3 Overheat protection may operate at Tj:125°C to 150°C
■ Outline Dimensions
0.42 ^±0.1
5
1.6 ^±0.2
0.42 ^±0.1
2
0.42 ^±0.1
4
(Unit : mm)
0.4^±0.05
1
0.42 ^±0.1
2
0.47 ^±0.1
4.5 ^±0.2
3
0.42 ^±0.1
Lot No.(OLD DIN standard)
1.5 ^±0.2
1.5 ^±0.2
Internal connection
4
( ) : Typical dimensions
Product mass:(0.055g)
5
Control
circuit
3
1
2
① Noise control terminal (Nr) ④ DC input (Vin)
② GND
⑤ DC output (VO)
③ ON/OFF control terminal (Vc)
Lead finish:Lead-free solder plating
(Composition: SnBi)
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP06037
1