PQ1CG3032FZ Datasheet, PDF (1/8 Pages) Sharp Electrionic Components – TO 220 TYPE CHOPPER REGULATOR

PQ1CG3032FZ/PQ1CG3032RZ
PQ1CG3032FZ/
PQ1CG3032RZ
s Features
1. Maximum switching current:3.5A
2. Built-in ON/OFF control function
3. Built-in soft start function to suppress overshoot of output
voltage in power on sequence or ON/OFF control sequence
4. Built-in oscillation circuit
(Oscillation frequency:TYP. 150kHz)
5. Built-in overheat/overcurrent protection function
6. TO-220 package
7. Variable output voltage
(Output variable range:Vref to 35V/−Vref to −30V)
[Possible to select step-down output/inversing output
according to external connection circuit]
8. PQ1CG3032FZ:Zigzag forming
PQ1CG3032RZ:Self-stand forming
s Applications
1. CTV
2. Digital OA equipment
3. Facsimiles, printers and other OA equipment
4. Personal computers and amusement equipment
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating
Unit
*1 _{Input voltage}
VIN
40
V
Output adjustment terminal voltage VADJ
7
V
Dropout voltage
VI-O
41
V
*2 _{Output-COM voltage}
VOUT
−1
V
*3 _{ON/OFF control voltage VC −0.3 to +40 V}
Switching current
ISW
3.5
A
*4 _{Power dissipation}
PD1
1.4
W
PD2
14
W
*5 _{Junction temperature}
Tj
150
˚C
Operating temperature
Storage temperature
Topr −20 to +80 ˚C
Tstg −40 to +150 ˚C
*6_{Soldering temperature}
Tsol
260
˚C
*1 Voltage between VIN terminal and COM terminal
*2 Voltage between VOUT terminal and COM terminal
*3 Voltage between ON/OFF control and COM terminal
*4 PD:With infinite heat sink
*5 Over heat protection may operate at the condition Tj=125˚C to 150˚C
*6 For 10s
TO-220 Type Chopper Regulator
s Outline Dimensions
PQ1CG3032FZ
10.2^MAX.
(6.8)
(Unit : mm)
4.5^±0.2
2.8^±0.2
φ3.2^±0.1
PQ1CG3032
Epoxy resin
(0.5)
5−0.8^±0.1
(1.5)
4−(1.7)
12345
∗ ( ) : Typical dimensions
PQ1CG3032RZ
10.2^MAX.
(6.8)
(5.0)
8.2^±0.7
3.2^±0.5
1 _VIN
2 V_OUT
3 COM
4 O_ADJ
5 ON/OFF
4.5^±0.2
2.8^±0.2
φ3.2^±0.1
PQ1CG3032
Epoxy resin
0.8^±0.1
4−(1.7)
12345
∗ ( ) : Typical dimensions
(1.7)
(0.5)
4.7^±0.6 4.7^±0.6
2.6^±0.5
1 _VIN
2 V_OUT
3 COM
4 O_ADJ
5 ON/OFF
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/