PQ070XZ02ZPH Datasheet, PDF (1/4 Pages) Sharp Electrionic Components – Low Voltage Operation Low Power-loss Voltage Regulator

PQ070XZ02ZxH
PQ070XZ02ZxH
Low Voltage Operation
Low Power-loss Voltage Regulator
Features
1.Low voltage operation (Minimum operating voltage: 2.35V)
2.Low dissipation current
Dissipation current at no load: MAX.2mA
Output OFF-state dissipation current: MAX.5μA
3.Low power-loss (Dropout voltage: MAX.0.5V)
4.Built-in overcurrent and overheat protection functions
5.RoHS directive compliant
Applications
1.Peripheral equipment of personal computers
2.Power supplies for various electronic equipment such as
DVD player or STB
■ Outline Dimensions
(Unit : mm)
6.6^MAX.
5.2^±0.5
070XZ02
3
Epoxy resin
Lead finish
identification mark
2.3^±0.5
(0.5)
H
(0～0.25)
0.5^+-00..12
4–(1.27)
(0.5)
( ) : Typical dimensions
Product mass:(0.3g)
12345
Model Line-up
Output
current (IO)
2A
Package
type
Taping
Sleeve
Variable
output
PQ070XZ02ZPH
PQ070XZ02ZZH
Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol
*1_{Input voltage}
VIN
*1_{Output control voltage VC}
*1_{Output adjustment pin voltage Vadj}
Output current
IO
*2_{Power dissipation}
Pd
*3_{Junction temperature}
Tj
Operating temperature Topr
Rating Unit
10
V
10
V
5
V
2
A
8
W
150
°C
-40 to +85 °C
Storage temperature
Tstg
Soldering temperature Tsol
-40 to +150 °C
260(10s) _°C
*1 All are open except GND and applicable terminals.
*2 Pd:With infinite heat sink
*3 There is case that over heat protection operates at the temperature Tj:125°C to 150°C,
so this item cannot be used in this temperature range.
1
3
Specific IC
2
4
5
1 DC input (VIN)
2 ON/OFF control (VC)
3 DC output (VO)
4 Output adjustment (Vadj)
5 GND
Lead finish:Lead-free solder plating
(Composition: Sn2Cu)
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP07009
1