PQ015ENAHZPH Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Low Voltage Operation,Compact Surface Mount type Low Power-Loss Voltage Regulators

PQxxxENAHZPH Series
PQxxxENAHZPH Series
Low Voltage Operation,Compact Surface
Mount type Low Power-Loss Voltage Regulators
Features
1.Low voltage operation
(Minimum operating voltage: 2.35V)
2.Output current : 1.5A
3.Low dissipation current
(Dissipation current at no load: MAX. 2mA
Output OFF-state dissipation current: MAX.5μA)
4.Compliant Ceramic capacitors
5.Built-in ON/OFF function
6.Built-in overcurrent and overheat protection functions
7.Correspond to flow soldering
8.RoHS directive compliant
Applications
1.Personal computers and peripheral equipment
2.Power supplies for various digital electronic equipment such
as DVD player or STB
Model Line-up
Output Voltage
(TYP.)
Model No.
1.5V
1.8V
2.5V
3.3V
PQ015ENAHZPH
PQ018ENAHZPH
PQ025ENAHZPH
PQ033ENAHZPH
■ Outline Dimensions
6.6^MAX.
Lead finish
identification mark
5.2^±0.5
3
(Unit : mm)
2.1^±0.5
(0.3)
015ENAH
Epoxy resin
H
12
(0～0.25)
0.3^+-00..12
4-(1.27)
(0.3)
( ) : Typical dimensions
Product mass:(0.23g)
45
1
3
Specific IC
2
5
1 DC input (VIN)
2 ON/OFF control terminal (VC)
3 DC output(VO)
4 NC
5 GND
Lead finish:Lead-free solder plating
(Composition: Sn2Cu)
Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
*1 _{Input voltage}
VIN
10
V
*1_{Output control voltage VC}
10
V
Output current
IO
1.5
A
*2 _{Power dissipation}
Pd
8
W
*3 _{Junction temperature}
Tj
150
°C
Operating temperature Topr
Storage temperature
Tstg
-40 to +85 °C
-40 to +150 °C
Soldering temperature Tsol
260(10s) °C
*1 All are open except GND and applicable terminals.
*2 Pd:With infinite heat sink
*3 There is case that over heat protection operates at the temperature Tj:125°C to 150°C,
so this item cannot be used in this temperature range.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP07002
1