PC957L0NSZ Datasheet, PDF (1/3 Pages) Sharp Electrionic Components – High Speed and High CMR OPIC Photocoupler

PC957L0NSZ
Under development
New product
Photocoupler
High Speed and High CMR ^*OPIC Photocoupler
Features
(1) High instantaneous common mode rejection
voltage (CMR:MIN. 15kV/µs)
(2) High speed response
(t_PHL:MAX. 0.8µs , t_PLH:MAX. 0.8µs)
(3) Isolation voltage(Viso(rms) : 5.0kV)
(4) 8-pin DIP package
(5) Flow soldering : 280˚C for 6s or less
(6) Recognized by UL (file No. E64380)
Under preparation for VDE standard
Outline Dimensions
2.54 ^{± 0.25}
Anode mark
87 65
PC957L
12
1.2 ^{± 0.3}
34
0.85 ^{± 0.2}
9.66 ^{± 0.5}
(Unit: mm)
7.62 ^{± 0.3}
0.5 ^{± 0.1}
0.26 ^{± 0.1}
Applications
(1) Programmable controller
(2) Inverter
Internal connection
8765
1234
1 _NC
2 _Anode
3 Cathode
4 NC
5 _GND
6 _Vo
7 NC
8 Vcc
* "OPIC" (Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of
a light-detecting element and signal-processing circuit integrated onto a single chip.
Absolute Maximum Ratings
( Ta=25˚C)
Parameter
Symbol
Rating
Unit
Forward current
IF
25
mA
Input
Reverse voltage
VR
5
V
Power dissipation
P
45
mW
Output
Supply voltage
Output voltage
Output current
VCC
−0.5 to +30
V
VO
−0.5 to +20
V
IO
8
mA
Power dissipation
*1 _{Isolation voltage}
Operating temperature
Storage temperature
*2 _{Soldering temperature}
PO
Viso^(rms)
Topr
Tstg
Tsol
100
5.0
−55 to +100
−55 to +125
270
mW
kV
˚C
˚C
˚C
*1 40 to 60% RH, for 1 minute
*2 For 10s at the portion of 0.2mm or more from the root of lead pins
(Notice)
•In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before
using any SHARP device.
•Specifications are subject to change without notice for improvement.
(Internet)
•Data for Sharp's optoelectronic/power devices is provided on internet. (Address http://sharp-world.com/ecg/)
1/2
2D-010305