PC925L0NSZ0F Datasheet, PDF (1/20 Pages) Sharp Electrionic Components – High Speed, 2.5A Output, Gate Drive DIP 8 pin

PC925L0NSZ0F
Series
PC925L0NSZ0F Series
High Speed, 2.5A Output,
Gate Drive DIP 8 pin
∗_{OPIC Photocoupler}
■ Description
PC925L0NSZ0F Series contains a LED optically cou-
pled to an OPIC chip.
It is packaged in a 8 pin DIP, available in SMT gullwing
lead form option.
Peak output current is 2.5A, Input-output isolation
voltage(rms) is 5kV and High speed response (t_PHL, t_PLH :
MAX. 0.5μs).
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC925L)
2. Package resin : UL flammability grade (94V-0)
■ Applications
1. IGBT/MOSFET gate drive for inverter control
■ Features
1. 8 pin DIP package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. Built-in direct drive circuit for MOSFET / IGBT drive
(I_O(peak) : 2.5A)
4. High speed response (t_PHL, t_PLH : MAX. 0.5μs)
5. Wide operating supply voltage range
(V_CC=15 to 30 V)
6. High noise immunity due to high instantaneous com-
mon mode rejection voltage (CM_H : MIN. −15kV/μs,
CM_L : MIN. 15kV/μs)
7. Long creepage distance type (wide lead-form type
only : MIN. 8mm)
8. High isolation voltage between input and output
(V_iso(rms) : 5kV)
9. Lead-free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-pro-
cessing circuit integrated onto a single chip.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D4-A09301EN
1
Date Sep. 01. 2006
© SHARP Corporation