PC911 Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Ultra-high Speed Response and High CMR OPIC Photocoupler

PC911
PC911
Ultra-high Speed Response and
High CMR OPIC Photocoupler
g Lead forming type ( I type ) and taping reel type ( P type ) are also available. ( PC911I/PC911P )
s Features
1. Ultra-high speed response
( t_PHL , t _PLH : TYP. 50ns )
2. High instantaneous common mode rejec-
tion voltage ( CM H : TYP. 10kV/ µ s )
3. High isolation voltage
( V_iso : 4 000V _rms )
4. Recognized by UL, file No. E64380
s Applications
1. High speed interfaces for computer periph-
erals and microcomputer systems
2. High speed line receivers
3. Interfaces with various data transmission
equipment
s Outline Dimensions
( Unit : mm)
0.85 ^{± 0.3}
8 76
1.2 ^{± 0.3}
5
PC911
Internal connection
diagram
8765
Amp
1 2 3 4 0.8 ^{± 0.2 1 2 3 4}
Primary side mark ( Sunken place )
9.22 ^{± 0.5}
7.62 ^{± 0.3}
0.5 ^{± 0.1}
2.54 ^{± 0.25}
θ θ = 0 ˚ to 13 ˚ θ
0.26 ^{± 0.1}
1 NC
2 Anode
3 Cathode
4 NC
5 GND
6 V_O
7 V_E
8 V_CC
* “ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
s Absolute Maximum Ratings
( Ta = 25˚C)
Input
Output
Parameter
*1_{Forward current}
Reverse voltage
*1_{Power dissipation}
Supply voltage
*2_{Enable voltage}
High level output current
Low level output current
**13_{Power dissipation}
*4_{Isolation voltage}
Operating temperature
Storage temperature
*5_{Soldering temperature}
Symbol
IF
VR
P
V CC
VE
V OH
I OL
P
V iso
T opr
T stg
T sol
Rating
20
5
40
7
7
-8
25
40
4 000
0 to + 70
- 55 to + 125
260
Unit
mA
V
mW
V
V
mA
mA
mW
V rms
˚C
˚C
˚C
*1 Ta = 0 to 70˚C
*2 Shall not exceed 500mV from supply voltage( Vcc ) .
*3 Applicable to output terminal( Vo)
*4 AC for 1 minute, 40 to 60% RH
*5 For 10 seconds at the position of 2mm or more from root of lead pins.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device. ”