PC901V0NSZX Datasheet, PDF (1/6 Pages) Sharp Electrionic Components – Digital Output Type OPIC Photocoupler

PC901V0NSZX
PC901V0NSZX
Digital Output Type OPIC
Photocoupler
s Features
1. Normal ON operation, open collector output
2. TTL and LSTTL compatible output
3. Operating supply voltage (VCC:3 to 15V)
4. Isolation voltage (Viso (rms):5kV)
5. High sensitivity
(IFLH:MAX. 2.0mA at Ta=25°C)
6. Under preparation for UL standard
7. 6-pin DIP package
s Applications
1. Programmable controllers
2. PC peripherals
3. Electronic musical instruments
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
Forward current IF
Input ^{*1 Peak forward current IFM}
Reverse voltage VR
50
mA
1
A
6
V
Power dissipation P
70
mW
Supply voltage VCC
16
V
Output ^{High level output voltage VOH}
16
V
Low level output current IOL
50
mA
Power dissipation PO
150
mW
Total power dissipation Ptot
170
mW
*2 _{Isolation voltage Viso (rms)}
5
kV
Operating temperature Topr −25 to +85 °C
Storage temperature Tstg −40 to +125 °C
*3 _{Soldering temperature Tsol}
260
°C
*1 Pulse width≤100µs, Duty ratio=0.001
*2 40 to 60%RH, AC for 1 min
*3 For 10 s
s Outline Dimensions
PC901VoNSZX
6 54
Anode
mark
PC901V
1 2 3 _0.6±0.2
1.2^±0.3
7.12^±0.3
(Unit : mm)
Internal connection
diagram
Voltage regulator
645
Amp
123
7.62^±0.3
0.5^±0.1 _2.54±0.25
0.26^±0.1
θ θ=0 to 13˚ θ
1 Anode
2 Cathode
3 NC
4 Vo
5 GND
6 VCC
∗ “OPIC”(Optical IC) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/