PC817X4J000F Datasheet, PDF (1/15 Pages) Sharp Electrionic Components – DIP 4pin General Purpose Photocoupler

PC817X Series
∗_{4-channel package type is also available.}
(model No. PC847X Series)
PC817X Series
DIP 4pin General Purpose
Photocoupler
■ Description
PC817X Series contains an IRED optically coupled
to a phototransistor.
It is packaged in a 4pin DIP, available in wide-lead
spacing option and SMT gullwing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V^(*) and CTR is 50%
to 600% at input current of 5mA.
■ Features
1. 4pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. High collector-emitter voltage (V_CEO:80V^(*))
4. Current transfer ratio (CTR : MIN. 50% at I_F=5 mA,
V_CE=5V)
5. Several CTR ranks available
6. High isolation voltage between input and output
(V_iso(rms) : 5.0 kV)
(*) Up to Date code "P7" (July 2002) V_CEO : 35V.
From the production Date code "J5" (May 1997) to "P7" (July
2002), however the products were screened by BV_CEO≥70V.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC817)
2. Package resin : UL flammability grade
(94V-0)
■ Applications
1. I/O isolation for MCUs (Micro Controller Units)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different po-
tentials and impedances
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A03101EN
1
Date Sep. 30. 2003
© SHARP Corporation