PC814XP Datasheet, PDF (1/14 Pages) Sharp Electrionic Components – DIP 4pin AC Input Photocoupler

PC814X Series
∗_{4-channel package type is also available.}
(model No. PC844X Series)
PC814X Series
DIP 4pin
AC Input Photocoupler
■ Description
PC814X Series contains an IRED optically coupled
to a phototransistor.
It is packaged in a 4pin DIP, available in SMT gullw-
ing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V^(*) and CTR is 20%
to 300% at input current of ±1mA.
■ Features
1. 4pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. AC input type
4. High collector-emitter voltage (VCEO : 80V^(*))
5. Current transfer ratio (CTR : MIN. 20% at IF=±1mA,
VCE=5V)
6. High isolation voltage between input and output
(V_iso(rms) : 5.0 kV)
(*) Up to Date code "P7" (July 2002) V_CEO : 35V.
From the production Date code "J5" (May 1997) to "P7" (July
2002), however the products were screened by BV_CEO≥70V.
■ Agency approvals/Compliance
1. Recognized by UL1577, file No. E64380 (as model
No. PC814)
2. Package resin : UL flammability grade (94V-0)
■ Applications
1. Programmable controllers
2. Telephone sets, telephone exchangers
3. System appliances
4. Signal transmission between circuits of different po-
tentials and impedances
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A03502EN
1
Date Mar. 26. 2004
© SHARP Corporation