PC814X1J000F Datasheet, PDF (1/14 Pages) Sharp Electrionic Components – DIP 4pin AC Input Photocoupler

PC814XJ0000F
Series
∗_{4-channel package type is also available.}
(model No. PC844XJ0000F Series)
PC814XJ0000F Series
DIP 4pin
AC Input Photocoupler
■ Description
PC814XJ0000F Series contains an IRED optically
coupled to a phototransistor.
It is packaged in a 4pin DIP, available in SMT gullw-
ing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V and CTR is 20% to
300% at input current of ±1mA.
■ Agency approvals/Compliance
1. Recognized by UL1577, file No. E64380 (as model
No. PC814)
2. Approved by VDE (DIN EN60747-5-2^(∗)) (as an op-
tion), file No. 40008087 (as model No. PC814)
3. Package resin : UL flammability grade (94V-0)
(∗)_{DIN EN60747-5-2 : successor standard of DIN VDE0884}
■ Features
1. 4pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. AC input type
4. High collector-emitter voltage (VCEO : 80V)
5. Current transfer ratio (CTR : MIN. 20% at IF=±1mA,
VCE=5V)
6. High isolation voltage between input and output
(V_iso(rms) : 5.0 kV)
7. Lead-free and RoHS directive compliant
■ Applications
1. Programmable controllers
2. Telephone sets, telephone exchangers
3. System appliances
4. Signal transmission between circuits of different po-
tentials and impedances
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A03503EN
1
Date Sep. 1. 2006
© SHARP Corporation