PC702V0YSZX Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – High Collector-emitter Voltage Type Photocoupler

PC702VxNSZX Series/PC702VxYSZX Series
PC702VxNSZX Series/
PC702VxYSZX Series
s Features
1. High collector-emitter voltage (VCEO:70V)
2. Isolation voltage (Viso (rms):5kV)
3. TTL compatible output
4. Recognized by UL, file No.E64380
Approved by TÜV (VDE0884)(PC702VxYSZX Series)
5. 6-pin DIP package
s Applications
1. Programmable controllers
2. Facsimiles
3. Telephones
s Model Line-up
Model No.
PC702VxNSZX Series
PC702VxYSZX Series
* Application Model No. PC702V
* _{Safty Standard Approval}
UL
TÜV(VDE0884)
−
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
Forward current IF
Input ^{*1 Peak forward current IFM}
Reverse voltage VR
60
mA
1.5
A
6
V
Power dissipation P
105
mW
Collector-emitter voltage VCEO
70
V
Emitter-collector voltage VECO
6
V
Output ^{Collector-base voltage VCBO}
70
V
Emitter-base voltage VEBO
6
V
Collector current IC
50
mA
Collector power dissipation PC
160
mW
Total power dissipation Ptot
200
mW
*2 _{Isolation voltage Viso (rms)}
5
kV
Operating temperature Topr −55 to +100 °C
Storage temperature Tstg −55 to +150 °C
*3 _{Soldering temperature Tsol}
260
°C
*1 Pulse width≤10µs, Duty ratio=0.004
*2 40 to 60%RH, AC for 1 min
*3 For 10 s
High Collector-emitter Voltage
Type Photocoupler
s Outline Dimensions
6 54
Anode
mark
PC702V
(Unit : mm)
Internal connection
diagram
654
1
Rank mark
2
3 _0.6±0.2
1.2^±0.3
7.12^±0.3
123
7.62^±0.3
0.5^±0.1 _2.54±0.25
0.26^±0.1
θ θ=0 to 13˚ θ
1 Anode
2 Cathode
3 NC
4 Emitter
5 Collector
6 Base
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/