PC4D10SYIP0F Datasheet, PDF (1/12 Pages) Sharp Electrionic Components – High Speed 10Mb/s, High CMR Mini-fl at 2-channel Package OPIC Photocoupler

PC4D10SNIP0F
Series
PC4D10SNIP0F Series
High Speed 10Mb/s, High CMR
Mini-flat 2-channel Package
∗_{OPIC Photocoupler}
■ Description
PC4D10SNIP0F Series contains a LED optically cou-
pled to an OPIC.
It is packaged in a 8 pin mini-flat (2-ch output).
Input-output isolation voltage(rms) is 3.75 kV.
High speed response (TYP. 10Mb/s) and CMR is
MIN. 10kV/μs.
■ Features
1. 2-ch output, 8 pin Mini-flat package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. High noise immunity due to high instantaneous com-
mon mode rejection voltage (CM_H : MIN. 10kV/μs, CM_L
: MIN. −10kV/μs)
4. High speed response
(t_PHL : TYP. 50ns, t_PLH : TYP. 48ns)
5. Isolation voltage between input and output (V_iso(rms) :
3.75kV)
6. Lead-free and RoHS driective compliant
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC4D10S)
2. Approved by VDE, DIN EN60747-5-2^(∗) (as an op-
tion), file No. 40009162 (as model No. PC4D10S)
3. Package resin : UL flammability grade (94V-0))
(∗) _{DIN EN60747-5-2 : successor standard of DIN VDE0884.}
■ Applications
1. Programmable controller
2. Inverter
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-pro-
cessing circuit integrated onto a single chip.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A09201EN
1
Date Sep. 1. 2006
© SHARP Corporation