PC410 Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Compact, Surface Mount Ultra-high Speed Response OPIC Photocoupler

PC410
PC410
Compact, Surface Mount
Ultra-high Speed Response
OPIC Photocoupler
s Features
1. Mini-flat package
2. Ultra-high speed response
( t_PLH , t _PHL : TYP. 50ns at R _L = 350Ω )
3. Isolation voltage between input and output
( V_iso : 2 500 V_rms )
4. Instantaneous common mode rejection
voltage CM H : TYP. 500V/ µ s
5. Recognized by UL(No.64380)
s Applications
1. Hybrid substrate which requires high den-
sity mounting
2. Personal computers, office computers and
peripheral equipment
3. Electronic musical instruments
4. Audio equipment
s Outline Dimensions
( Unit : mm )
1.27 ^{± 0.25}
654
PC410
Internal connection
diagram
654
Anode mark
2.54 ^{± 0.25}
1
3
0.4 ^{± 0.1}
1
3
3.6 ^{± 0.3}
C0.4
(Input Side)
5.3 ^{± 0.3}
0.5
+
-
0.4
0.2
6˚
1 Anode
3 Cathode
4 GND
5 Vo
6 Vcc
7.0
+
-
0.2
0.7
s Package Specifications
Model No.
PC410
PC410T
PC410Z
Package specifications
Taping package ( Net:3 000pcs. )
Taping package ( Net: 750pcs.)
Sleeve package ( Net: 100pcs.)
Diameter of reel Tape width
370 mm 12 mm
180 mm 12 mm
-
-
* “ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
s Absolute Maximum Ratings
( Ta = 25˚C)
Parameter
Symbol
Rating
Unit
*1 _{Forward current}
IF
20
mA
Input
Reverse voltage
VR
5
V
Power dissipation
P
40
mW
*2_{Supply voltage}
V CC
7
V
Output
High level output voltege
Low level output current
V OH
7
V
I OL
50
mA
Output collector power dissipation
PO
85
mW
*3 _{Isolation voltege}
V iso
2 500
V rms
Operating temperature
T opr
0 to + 70
˚C
Storage temperature
T stg - 40 to + 125 ˚C
*4 _{Soldering temperature}
T sol
260
˚C
*1 Ta = 0 to + 70˚C
*2 For 1 minute MAX.
*3 AC for 1 minute, 40 to 60% RH. Apply the specified voltage between the whole of the
electrode pins on the input side and the whole of the electrode pins on the output side.
*4 For 10 seconds.
Soldering area
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”