PC3SD21NTZB Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Phototriac Coupler for Triggering

PC3SD21NTZB Series
PC3SD21NTZB
Series
s Features
1. Low zero-cross voltage (VOX[MAX.]=20V)
2. Isolation voltage between input and output (Viso (rms):5kV)
3. High critical rate of rise of OFF-state voltage
(dV/dt:MIN. 1 000V/µs)
4. Recognized by UL, file No. E64380
5. VDE:Under application (optionally available)
❈ PC3SD21NTZB Series are for 200V line
s Applications
1. Home appliances
2. OA equipment, FA equipment
3. SSRs
s Model Line-up
Minimum trigger current (IFT[MAX.])
7mA
5mA
3mA
for AC 200V line
PC3SD21NTZB
PC3SD21NTZC
PC3SD21NTZD
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
Input ^{*1 Forward current}
IF
Reverse voltage VR
50
mA
6
V
*1 _{RMS ON-state current IT (rms)}
0.1
A
Output Peak one cycle surge current Isurge 1.2 (50Hz sine wave) A
Repetitive peak OFF-state voltage VDRM
600
V
Operating temperature Topr −30 to +100 °C
Storage temperature Tstg −55 to +125 °C
*2 _{Isolation voltage Viso (rms)}
5
kV
Soldering temperature _{Tsol 260 (For 10s) °C}
*1 The derating factors of absolute maximum ratings due to ambient temperature are
shown in Fig.1, 2
*2 AC for 1 min, 40 to 60%RH, f=60Hz
Phototriac Coupler for
Triggering
s Outline Dimensions
6 54
Anode
mark
3SD21
CTR
1
Rank mark
2
3 _0.6±0.2
1.2^±0.3
7.12^±0.3
(Unit : mm)
Internal connection
diagram
654
Zero cross
NC circuit
123
7.62^±0.3
0.5^±0.1 _2.54±0.25
0.26^±0.1
θ θ=0 to 13˚ θ
1 Anode
2 Cathode
3 NC
4 Anode, Cathode
5 No external connection
6 Anode, Cathode
❈ Pin 5 is not allowed external connection
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/