PC3SD11YTZDF Datasheet, PDF (1/1 Pages) Sharp Electrionic Components – Low Input Drive Type Phototriac Coupler

PC3SD11YTZDF
Under development
New product
Phototriac Coupler
Low Input Drive Type Phototriac Coupler
Features
(1) Low input drive
(Minimum trigger current : MAX. 3 mA)
(2) High repetitive peak OFF-state voltage (VDRM : 600 V)
(3) High isolation voltage (Viso(rms) : 5 000V)
Outline Dimensions
(Unit:mm)
2.54^±0.25
654
3SD11
Internal connection
654
(4) Recognized by UL1577(double protection isolation)
4-D
Approved by CSA
Approved by VDE(DIN EN60747-5-2)
{as model No. "3SD11"}
12
Anode
mark
3
0.6^±0.2
1.2^±0.3
NC
123
(6) Lead-free components (adaptable to RoHS directive)
Applications
(1) OA equipment
(2) FA power supply
(3) Vending machine
(4) SSRs
Absolute Maximum Ratings
7.12^±0.3
0.5^±0.1
7.62^±0.3
0.26^±0.1
θ
θ : 0 to 13
(Ta=25 °C)
1 Anode
2 Cathode
3 NC
4 Anode/Cathode
5 No external
connection
6 Anode/Cathode
Parameter
Symbol Ratings
Unit
Input
Forward current
Reverse voltage
IF
50
mA
VR
6
V
RMS ON-state current
IT(rms)
100
mA
Output ^*1 Peak one cycle surge current
Isurge
1.2
A
Repetitive peak OFF-state voltage
*2 _{Isolation voltage}
Operating temperature
Storage temperature
*3 _{Soldering temperature}
VDRM
600
V
Viso(rms)
5.0
Topr -30 to +100
kV
°C
*1 50Hz sine wave
*2 AC for 1 minute,
RH=40 to 60%, f=60Hz
Tstg
-55 to +125
°C
*3 For 10s
Tsol
260
°C
Electro-optical Characteristics
Parameter
Input ^{Forward voltage}
Reverse current
Repetitive peak OFF-state current
Output
ON-state voltage
Holding current
Critical rate of rise of OFF-state voltage
Transfer ^{Minimum trigger current}
charac- _{Isolation resistance}
teristics _{Turn-on time}
Symbol
V_F
IR
IDRM
VT
I_H
dV/dt
I_FT
RISO
ton
Conditions
IF=20 mA
VR=3 V
V_D=V_DRM
IT=0.1 A
VV_DD==16/V√−2 • V_DRM
VD=6 V, RL=100 Ω
DC=500 V, 40 to 60 %RH
VD=6 V, RL=100 Ω, IF=10 mA
MIN.
−
−
−
−
0.1
1 000
−
5×10¹⁰
−
TYP.
1.2
−
−
−
−
−
−
10¹¹
−
(Ta=25 °C)
MAX. Unit
1.4 V
10^−5
A
10^−6
A
2.5 V
3.5 mA
− V/µs
3 mA
−
Ω
100 ^µs
As of April 2004
(Notice)
• In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
• Specifications are subject to change without notice for improvement.
(Internet)
• Data for Sharp's optoelectronic/power devices is provided on internet. ( Address http://sharp-world.com/products/device/)
1/1
D2-030401-B