PC3H2 Datasheet, PDF (1/13 Pages) Sharp Electrionic Components – Mini-flat Half Pitch Package, High CMR Photocoupler

PC3H2 Series
PC3H2 Series
Mini-flat Half Pitch Package,
High CMR
∗_{4-channel package type is also available. (model No. PC3Q62) Photocoupler}
■ Description
PC3H2 Series contains a IRED optically coupled to
a phototransistor.
It is packaged in a 4-pin Mini-flat, Half pitch type.
Input-output isolation voltage(rms) is 2.5kV.
Collector-emitter voltage is 80V^(*), CTR is 20% to
400% at input current of 1mA and CMR is MIN. 10kV/µs.
■ Features
1. 4-pin Mini-flat Half pitch package (Lead pitch :
1.27mm)
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. High collector-emitter voltage (VCEO : 80V^(∗))
4. High noise immunity due to high common mode re-
jection voltage (CMR : MIN. 10kV/µs)
5. Isolation voltage between input and output (Viso(rms) :
2.5kV)
(*) Up to Date code "P9" (September 2002) V_CEO : 70V.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC3H2)
2. Package resin : UL flammability grade (94V-0)
■ Applications
1. Programmable controllers
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A01101EN
1
Date Sep. 30. 2003
© SHARP Corporation