PC1S3021NTZF Datasheet, PDF (1/14 Pages) Sharp Electrionic Components – Phototriac Coupler for triggering

PC1S3021NTZF
Series
PC1S3021NTZF Series
V_DRM : 400V
Non-zero cross type
DIP 6pin
Phototriac Coupler for triggering
■ Description
PC1S3021NTZF Series Phototriac Coupler include
an infrared emitting diode (IRED) optically coupled to
an output Phototriac.
These devices feature full wave control and are ideal
isolated drivers for medium to high current Triacs.
DIP package provides 5kV isolation from input to
output with superior commutative noise immunity.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. 1S3021)
2. Approved by CSA, file No. CA95323 (as model No.
1S3021)
3. Optionary available VDE Approved (DIN EN
60747-5-2), file No. 4008189 (as model No. 1S3021)
4. Package resin : UL flammability grade (94V-0)
■ Features
1. High repetitive peak off-state voltage (V_DRM : 400V)
2. Non-zero crossing functionality
3. 6pin DIP package
4. Superior noise immunity (dV/dt : MIN. 1 000V/μs)
5. Double transfer mold construction (Ideal for Flow
Soldering)
6. High isolation voltage between input and output
(V_iso(rms) : 5kV)
7. Lead-free and RoHS directive compliant
■ Applications
1. Triggering for Triacs used to switch on and off
devices which require AC Loads
For example heaters, fans, motors, solenoids, and
valves
2. Triggering for Triacs used for implementing phase
control in applications such as lighting control and
temperature control (HVAC).
3. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A08701EN
1
Date Dec. 1. 2005
© SHARP Corporation