PC123P2 Datasheet, PDF (1/16 Pages) Sharp Electrionic Components – DIP 4pin Reinforced Insulation Type Photocoupler

PC123 Series
PC123 Series
DIP 4pin Reinforced Insulation Type
Photocoupler
■ Description
PC123 Series contains an IRED optically coupled to
a phototransistor.
It is packaged in a 4-pin DIP, available in wide-lead
spacing option and SMT gullwing lead-form option.
Input-output isolation voltage(rms) is 5.0kV.
CTR is 50% to 400% at input current of 5mA.
■ Features
1. 4-pin DIP package
2. Double transfer mold package (Ideal for Flow Solder-
ing)
3. Current transfer ratio (CTR : MIN. 50% at I_F=5 mA,
V_CE=5V)
4. Several CTR ranks available
5. Reinforced insulation type (Isolation distance : MIN.
0.4mm)
6. Long creepage distance type (wide lead-form type
only : MIN. 8mm)
7. High isolation voltage between input and output
(V_iso(rms) : 5.0 kV)
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC123)
2. Approved by BSI, BS-EN60065, file No. 7087, BS-
EN60950 file No. 7409, (as model No. PC123)
3. Approved by SEMCO, EN60065, EN60950, file No.
204582 (as model No. PC123)
4. Approved by DEMCO, EN60065, EN60950 (as mod-
el No. PC123)
5. Approved by NEMKO, EN60065, EN60950, file No.
P03100205 (as model No. PC123)
6. Approved by FIMKO, EN60065, EN60950, file No.
19383 (as model No. PC123)
7. Recognized by CSA file No. CA95323 (as model No.
PC123)
8. Approved by VDE, VDE0884 (as an option) file No.
83601 or No. 134349 or No.40005304 (as model
No. PC123)
9. Package resin : UL flammability grade (94V - 0)
■ Applications
1. I/O isolation for MCUs (Micro Controller Units)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different po-
tentials and impedances
4. Over voltage detection
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A02902EN
1
Date Oct. 31. 2003
© SHARP Corporation