LZ2413H Datasheet, PDF (1/11 Pages) Sharp Electrionic Components – 1/4-type Color CCD Area Sensors with 270 k Pixels

LZ2413H
LZ2413H
DESCRIPTION
The LZ2413H is a 1/4-type (4.5 mm) solid-state
image sensor that consists of PN photo-diodes
and CCDs (charge-coupled devices). With
approximately 270 000 pixels (542 horizontal x 492
vertical), the sensor provides a stable high-resolution
color image.
FEATURES
• Number of effective pixels : 512 (H) x 492 (V)
• Number of optical black pixels
– Horizontal : 2 front and 28 rear
• Pixel pitch : 7.2 µm (H) x 5.6 µm (V)
• Mg, G, Cy, and Ye complementary color filters
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
• Horizontal shift register clock and reset gate clock
voltage : 3.3 V (TYP.)
• Variable electronic shutter (1/60 to 1/10 000 s)
• Compatible with NTSC standard
• Package :
14-pin half-pitch WDIP [Plastic]
(WDIP014-P-0400A)
Row space : 10.16 mm
1/4-type Color CCD Area Sensors
with 270 k Pixels
PIN CONNECTIONS
14-PIN HALF-PITCH WDIP
TOP VIEW
OD 1
ØRS 2
NC1 3
OS 4
NC2 5
ØH2 6
ØH1 7
14 GND
13 ØV4
12 ØV3
11 ØV2
10 ØV1
9 PW
8 OFD
(WDIP014-P-0400A)
PRECAUTIONS
• The exit pupil position of lens should be more
than 25 mm from the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1