LZ23J3V Datasheet, PDF (1/15 Pages) Sharp Electrionic Components – 1/2.7-type Interline Color CCD Area Sensor with 1 310 k Pixels

Back
LZ23J3V
LZ23J3V
DESCRIPTION
The LZ23J3V is a 1/2.7-type (6.72 mm) solid-state
image sensor that consists of PN photo-diodes
and CCDs (charge-coupled devices). With
approximately 1 310 000 pixels (1 344 horizontal x
971 vertical), the sensor provides a stable high-
resolution color image.
FEATURES
• Optical size : 6.72 mm (aspect ratio 4 : 3)
• Interline scan format
• Square pixel
• Number of effective pixels : 1 292 (H) x 966 (V)
• Number of optical black pixels
– Horizontal : 3 front and 49 rear
– Vertical : 3 front and 2 rear
• Number of dummy bits
– Horizontal : 28
– Vertical : 2
• Pixel pitch : 4.2 µm (H) x 4.2 µm (V)
• R, G, and B primary color mosaic filters
• Supports monitoring mode
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
• Variable electronic shutter
• Package :
16-pin shrink-pitch WDIP [Plastic]
(WDIP016-P-0500C)
Row space : 12.70 mm
1/2.7-type Interline Color CCD Area
Sensor with 1 310 k Pixels
PIN CONNECTIONS
16-PIN SHRINK-PITCH WDIP
TOP VIEW
OD 1
GND 2
OFD 3
PW 4
ØRS 5
NC 6
ØH1 7
ØH2 8
16 OS
15 GND
14 ØV1A
13 ØV1B
12 ØV2
11 ØV3A
10 ØV3B
9 ØV4
(WDIP016-P-0500C)
PRECAUTIONS
• The exit pupil position of lens should be 15 to 50
mm from the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1