LZ21N3V Datasheet, PDF (1/18 Pages) Sharp Electrionic Components – 1/2-type Interline Color CCD Area Sensors with 2 140 k Pixels

LZ21N3V/VS
LZ21N3V/ VS
DESCRIPTION
The LZ21N3V/VS are 1/2-type (8.08 mm) solid-
state image sensors that consist of PN photo-
diodes and CCDs (charge-coupled devices). With
approximately 2 140 000 pixels (1 704 horizontal x
1 255 vertical), the sensor provides a stable high-
resolution color image.
FEATURES
• Optical size : 8.08 mm (aspect ratio 4 : 3)
• Interline scan format
• Square pixel
• Number of effective pixels : 1 650 (H) x 1 250 (V)
• Number of optical black pixels
– Horizontal : 2 front and 52 rear
– Vertical : 3 front and 2 rear
• Number of dummy bits
– Horizontal : 28
– Vertical : 2
• Pixel pitch : 3.95 µm (H) x 3.95 µm (V)
• R, G, and B primary color mosaic filters
• Supports monitoring mode
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
• Variable electronic shutter
• Packages
– LZ21N3V : 20-pin half-pitch WDIP [Plastic]
(WDIP020-P-0500)
Row space : 12.20 mm
– LZ21N3VS : 20-pin half-pitch WSOP [Plastic]
(WSOP020-P-0525)
1/2-type Interline Color CCD
Area Sensors with 2 140 k Pixels
PIN CONNECTIONS
20-PIN HALF-PITCH WDIP
20-PIN HALF-PITCH WSOP
TOP VIEW
OD 1
GND 2
OFD 3
PW 4
ØRS 5
NC1 6
NC2 7
ØH1 8
NC3 9
ØH2 10
20 OS
19 GND
18 NC5
17 NC4
16 ØV1A
15 ØV1B
14 ØV2
13 ØV3A
12 ØV3B
11 ØV4
(WDIP020-P-0500)
(WSOP020-P-0525)
PRECAUTIONS
• The exit pupil position of lens should be 30 to 50
mm from the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
COMPARISON TABLE
Package
LZ21N3V
20-pin half-pitch WDIP
LZ21N3VS
20-pin half-pitch WSOP
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1