LZ21N3 Datasheet, PDF (1/19 Pages) Sharp Electrionic Components – 1/2-type Interline Color CCD Area Sensor with 2 140 k Pixels

LZ21N3
LZ21N3
DESCRIPTION
The LZ21N3 is a 1/2-type (8.08 mm) solid-state
image sensor that consists of PN photo-diodes
and CCDs (charge-coupled devices). With
approximately 2 140 000 pixels (1 704 horizontal x
1 255 vertical), the sensor provides a stable high-
resolution color image.
FEATURES
• Optical size : 8.08 mm (aspect ratio 4 : 3)
• Interline scan format
• Square pixel
• Number of effective pixels : 1 650 (H) x 1 250 (V)
• Number of optical black pixels
– Horizontal : 2 front and 52 rear
– Vertical : 3 front and 2 rear
• Number of dummy bits
– Horizontal : 28
– Vertical : 2
• Pixel pitch : 3.95 µm (H) x 3.95 µm (V)
• Mg, G, Cy, and Ye complementary color mosaic
filters
• Supports monitoring mode
• Low fixed-pattern noise and lag
• No burn-in and no image distortion
• Blooming suppression structure
• Built-in output amplifier
• Built-in overflow drain voltage circuit and reset
gate voltage circuit
• Variable electronic shutter
• Package :
20-pin half-pitch WDIP [Plastic]
(WDIP020-P-0500)
Row space : 12.20 mm
1/2-type Interline Color CCD Area
Sensor with 2 140 k Pixels
PIN CONNECTIONS
20-PIN HALF-PITCH WDIP
TOP VIEW
OD 1
GND 2
OFD 3
PW 4
ØRS 5
NC1 6
NC2 7
ØH1 8
NC3 9
ØH2 10
20 OS
19 GND
18 NC5
17 NC4
16 ØV1A
15 ØV1B
14 ØV2
13 ØV3A
12 ØV3B
11 ØV4
(WDIP020-P-0500)
PRECAUTIONS
• The exit pupil position of lens should be 30 to 50
mm from the top surface of the CCD.
• Refer to "PRECAUTIONS FOR CCD AREA
SENSORS" for details.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1