IR3Y30M Datasheet, PDF (1/22 Pages) Sharp Electrionic Components – CCD Signal Processors for B/W CCD Cameras

IR3Y30M/M1
IR3Y30M/M1
DESCRIPTION
The IR3Y30M/M1 are bipolar single-chip signal
processing ICs with built-in low-pass filter and delay
line for B/W video cameras. They realize both
downsizing and cost reduction of the finished set.
CCD Signal Processors for
B/W CCD Cameras
FEATURES
• Low power consumption : 265 mW (TYP.)
• Wide AGC range : –3 to +29 dB
• High speed sample-and-hold circuits :
pulse width 15 ns (MIN.)
• Signal processing from CCD output to 75 $ video
output is possible
• Built-in low-pass filter
• Built-in comparator for electronic exposure control
• Built-in aperture circuit and delay line
• Single +5 V power supply
• Packages
– IR3Y30M : 48-pin QFP (QFP048-P-1010)
– IR3Y30M1 : 48-pin QFP (QFP048-P-0707)
0.5 mm pin-pitch
COMPARISON TABLE
Package
Power consumption
PD derating ratio
Operating temperature
IR3Y30M
48-pin QFP (QFP048-P-1010)
725 mW
5.8 mW/˚C
–30 to +75 ˚C
IR3Y30M1
48-pin QFP (QFP048-P-0707)
560 mW
4.5 mW/˚C
–30 to +70 ˚C
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1