GP2Y0D805Z0F Datasheet, PDF (1/9 Pages) Sharp Electrionic Components – Distance Measuring Sensor Unit Digital output (50 mm) type

GP2Y0D805Z0F
GP2Y0D805Z0F
Distance Measuring Sensor Unit
Digital output (50 mm) type
■Description
GP2Y0D805Z0F is a distance measuring sensor unit,
composed of an integrated combination of PSD
(position sensitive detector) , IRED (infrared emitting
diode) and signal processing circuit.
The variety of the reflectivity of the object, the
environmental temperature and the operating duration
are not influenced easily to the distance detection
because of adopting the triangulation method.
The output voltage of this sensor stays high in case
an object exists in the specified distance range. So
this sensor can also be used as proximity sensor.
■Features
1. Digital output type
2. Short distance type
Detecting distance : Typ. 50 mm
3. Low profile
Package size : 13.6×7×7.95 mm
4. Consumption current : Typ. 5 mA
5. Battery drive compatible
Supply voltage : 2.7 to 6.2 V
6. Sunlight tolerance
7. Add Vin terminal, and an external transistor of Vcc
line is unnecessary at intermittent operating.
■Agency approvals/Compliance
1. Compliant with RoHS directive (2002/95/EC)
■Applications
1. Touch-less switch
(Sanitary equipment, Control of illumination, etc.)
2. Robot cleaner
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: E4-A01001EN
1
Date Dec.01.2006
©SHARP Corporation