GP2W0116YPS Datasheet, PDF (1/7 Pages) Sharp Electrionic Components – IrDA Transceiver Module Compliant with IrDA1.2 Low Power

GP2W0116YPS
GP2W0116YPS
IrDA Transceiver Module
Compliant with IrDA1.2 Low Power
s Features
1. Compliant with IrDA1.2 low power
2. Integrated package of transmitter/receiver.
(7.2×2.75×height 1.85mm)
3. General purpose
4. Low dissipation current due to shut-down function
(Dissipation current at shut-down mode:Max. 0.1µA)
5. Soldering reflow type
6. Shield type
s Applications
1. Cellular phones, PHS
2. Personal information tools
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating
Unit
Supply voltage
VCC
0 to 6.0
V
LED Supply voltage
*1 _{Peak forward current}
VLEDA 0 to 7.0
V
IFM
60
mA
Operating temperature
Storage temperature
*2 _{Soldering temperature}
T_opr −40 to +85 °C
Tstg −40 to +85 °C
Tsol
260
°C
*1 Pulse width 78.1µs, Duty ratio:3/16
*2 For MAX. 10s
s Recommended Operating Conditions
Parameter
Symbol Rating
Unit
Supply voltage
VCC 2.0 to 3.6
V
LED Supply voltage
VLEDA 2.0 to 6.0
V
Transmission rate
BR 2.4 to 115.2 kb/s
High level input voltage (SD terminal) V_IHSD V_CC×0.67 to V_CC V
Low level input voltage (SD terminal) VILSD 0 to VCC×0.1 V
*3 _{High level input voltage (TXD) VIHTXD VCC×0.8 to VCC V}
*3 _{Low level input voltage (TXD) VILTXD 0 to VCC×0.2 V}
*3 Refer to Fig.9
s Outline Dimensions
(Unit : mm)
7.2^±0.3
4.8
2.0
2.4
0.8
Center of detector
Center of emitter
7
1 2345 6
6-0.4
P0.95×5=4.75
1 VCC
2 GND
3 SD
4 RXD
5 TXD
6 LEDA
7 SGND
6-0.6 ^{6 5 4 3 2 1}
P0.95×5=4.75
❈Unspecified tolerance : ±0.2mm
❈ Au plate
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/