GP2S30 Datasheet, PDF (1/4 Pages) Sharp Electrionic Components – Long Focal Distance Type Photointerrupter with Connector

GP2S30
s Features
1. Long focal distance
Detection distance: 3 to 7mm
2. High sensing accuracy by laser
trimming of resistor
3. 3-pin connector
s Applications
1. Printers
2. Facsimiles
3. Copiers
GP2S30
Long Focal Distance Type
Photointerrupter with
Connector
s Outline Dimensions
(Unit : mm )
2 - 2.0 ^{± 0.3}
2 - 4.5
2 - 2.5
2- 3.0 ^{± 0.3}
Internal connection
diagram
7.0 ^{± 0.3}
9.0
2 - 1.0 ^{± 0.3} _16.0 ^± 0.3 0.8
1
2
3
1 Vo
2 Vcc
3 GND
1
2
3
7.6 ^{± 0.3}
5.0
4.0 ^{± 0.3}
g
GP2S30
∗Tolerance:± 0.2mm
∗( ) : Reference dimensions
g Japan AMP made EI 3pin connector 171825-3
Recommended connector on the
inserted side 172053-3, etc. gg
gg Recommended connectors on the inserted side
are shown on the below page.
s Absolute Maximum Ratings
(Ta = 25˚C)
Parameter
Supply voltage
Output current
∗1_{Operating temperature}
∗1_{Storage temperature}
Symbol Rating Unit
VCC - 0.5 to + 7 V
IO
1
mA
Topr - 20 to + 70 ˚C
Tstg - 40 to + 80 ˚C
∗1 The connector should be plugged in/out and the unit's hook should be used at normal temperature.
s Electro-optical Characteristics
( V_CC = 5V, Ta = 25˚C unless otherwise specified )
Parameter
Operating supply voltage
Dissipation current
Low level output voltage
High level output voltage
Response frequency
Symbol
VCC
ICC
VOL
VOH
f
Conditions
Ta =- 20 to + 70˚C
∗2_{At detecting, d = 5mm}
∗3_{At non-detecting, d = 5mm}
∗2_{At detecting, d = 5mm}
∗4
MIN. TYP. MAX. Unit
4.5
5.0
5.5
V
-
26
35
mA
-
0.2
0.8
V
2.1
3.0
3.9
V
-
-
170
Hz
∗2 At detecting : White PPC paper as a reflective object without external disturbing light in Fig. 1.
∗3 At non-detecting : Black suede tape as a reflective object without external disturbing light in Fig. 1.
∗4 The definition of response frequency is shown in Fig. 2.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”