GP1S36 Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Photointerrupter for Detecting Tilt Direction

GP1S36
GP1S36
Photointerrupter for Detecting
Tilt Direction
s Features
1. Subminiature (4.0×4.2×3.8mm)
(with built-in super compact ball for detecting tilt direction)
2. 2-phase output type
3. Able to detect the tilt direction of both side (±90˚) by the
position of rolling ball.
4. High reliability due to non-contact structure
s Applications
1. Digital cameras
2. Camcoders
s Absolute Maximum Ratings
(Ta=25˚C)
Parameter
Symbol Rating
Unit
Forward current
IF
50
mA
Input Reverse voltage VR
6
V
Power dissipation P
75
mW
Collector-emitter ^VCE1O
voltage
VCE2O
35
V
Output
Emitter-collector
voltage
VE1CO
VE2CO
6
V
Collector current IC
20
mA
Collector Power dissipation PC
75
mW
Total power dissipation Ptot
100
mW
Operating temperature Topr −25 to +85 ˚C
Storage temperature Tstg −40 to +100 ˚C
*1 _{Soldering temperature 1 Tsol}
260
˚C
*2 _{Soldering temperature 2 Tsol}
320
˚C
*1 For MAX. 5s
*2 For MAX. 2s at the position of 0.8mm from the bottomface of resin package by
hand soldering.
s Outline Dimensions
(Unit : mm)
Internal connection diagram
3
2
PT2
4
PT1
5
1 Anode
2 Cathode
3 Emitter
1
4 Emitter
5 Collector
4.2
4.0
*3.05
0.15−+00..12
*1.27
0.4
*1.27
g Unspecified tolerance : ±0.2mm
5
1 _{g The dimensions indicated by * refer to}
4
those measured from the lead base.
3
2 ^{g Burr is not included in the dimensions.}
Burr's dimensions : 0.15MAX.
1mm^MIN.
Soldering area
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/