GP1S092HCPIF Datasheet, PDF (1/13 Pages) Sharp Electrionic Components – SMT, Gap : 2mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter

GP1S092HCPIF
GP1S092HCPIF
SMT, Gap : 2mm, Slit : 0.3mm
Phototransistor Output,
Compact Transmissive
Photointerrupter
■ Description
GP1S092HCPIF is a compact-package, photo-
transistor output, transmissive photointerrupter, with
opposing emitter and detector in a molding that provides
non-contact sensing. The compact package series is
a result of unique technology combing transfer and
injection molding.
This surface mount device has a shaped positioning
pin to assure accurate PCB placement, of the emitter
and detector. It is unique, because it is one of the
few photointerrupters that comes in Tape and Reel
packaging, for use with highly automated pick and
place equipment.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or
motion.
2. Example: printer, lens control for camera
■ Features
1. Transmissive with phototransistor output
2. Highlights:
• Compact Size
• Positioning Pin “D” shaped to prevent misalignment
• Surface Mount Type (SMT)
• Tape and Reel (T&R) 2 000 pcs per reel
3. Key Parameters:
• Gap Width : 2mm
• Slit Width (detector side): 0.3mm
• Package : 4.5×2.6×2.9 mm
4. Lead free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A00201EN
1
Date Oct. 3. 2005
© SHARP Corporation