GP1L50 Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – High Sensitivity Photointerrupter

GP1L50/GP1L51
GP1L52V/GP1L54
GP1L50/GP1L51/GP1L52V/GP1L54
High Sensitivity
Photointerrupter
s Features
1. High sensing accuracy( Slit width:0.5mm )
2. High current transfer ratio
( CTR: MIN. 50% at I _F= 1mA )
3. Both-sides mounting type: GP1L50 (Case height: 10mm )
Either-side mounting type: GP1L51 (Case height: 10mm )
PWB direct mounting type: GP1L52V (Case height: 10mm )
PWB direct mounting type: GP1L54 (Case height: 8mm )
s Outline Dimensions
GP1L50
19.0 ^{± 0.2}
2 - φ 3.2 ^{± 0.2}
25.0 ^{± 0.3}
12.2 ^{± 0.3}
3.0
+
-
0.2
0.1
2 - C2.0
(Both sides of detector
and emitter )
Slit width
0.5
s Applications
1. OA equipment, such as floppy disk drives,
printers, facsimiles, etc.
2. VCRs
GP1L51
2.0
12.2 ^{± 0.3}
3.0
+
-
0.2
0.1
( Unit : mm)
(Both sides
of detector
5.0 and emitter )
0.5
2 - φ 3.2^{± 0.2}
Slit width
4
-
0.4
+
-
0.3
0.1
(9.2)
23
14
Marking : ^GP1L50
GP1L52V
12.2 ^{± 0.3}
3.0
+
-
0.2
0.1
4-
0.45^+-
0.3
0.1
(2.54)
*Unspecified tolerances shall be as follows ;
Dimensions(d) Tolerance
d<=6.0 ± 0.1
6.0< d<=18.0 ± 0.2
18.0< d<=25.0 ± 0.25
*( ) : Reference dimensions
(Both sides
of detector
and emitter ) ^5.0
0.5
Slit width
C1.0
4
-
0.4
+0.3
- 0.1
(9.2)
4
1
3
2
GP1L54
4-
0.45^+-
0.3
0.1
(2.54)
12.0
18.0
*Unspecified tolerances shall be as follows ;
Dimensions(d) Tolerance
d<= 6.0 ± 0.1
6.0< d<=18.0 ± 0.2
*( ) : Reference dimensions
12.2 ^{± 0.3}
3.0
+
-
0.4
0
5.0
0.5
Slit width
C1.0
4-
0.4
+
-
0.3
0.1
(9.2)
4
1
3
2
4
-
0.45
+
-
0.3
0.1
(2.54 )
*Unspecified tolerances shall be as follows ;
Dimensions(d) Tolerance
d<=6.0 ± 0.1
6.0< d<=18.0 ± 0.2
*( ) : Reference dimensions
4-
0.4
+
-
0.3
0.1
(9.2)
7.5 ^{± 0.1}
1
2
2 - φ 0.7
43
1.75
2 - R0.3 ^MAX.
4
-
0.45
+
-
0.3
0.1
(2.54)
*Unspecified tolerances shall be as follows ;
Dimensions(d) Tolerance
d<= 6.0 ± 0.1
6.0< d<= 18.0 ± 0.2
*( ) : Reference dimensions
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”