GP1AQ36L Datasheet, PDF (1/3 Pages) Sharp Electrionic Components – High Temperature Operation Type OPIC Photointerrupter with Connector

GP1AQ36L
s Features
1. Capable of operation at high temperature
( Operating temperature: 90˚C MAX. )
2. Snap-in mounting type
3. Can be mounted on 2 different thickness
boards ( 1.0mm, 1.2mm )
4. Uses 3-pin connector terminal
s Applications
1. Copiers, laser beam printers
2. Facsimiles
3. FA equipment
GP1AQ36L
High Temperature Operation
Type OPIC Photointerrupter
with Connector
s Outline Dimensions
(Unit : mm )
1.0
20.0
+
-
0
0.2
15.0
2.5
5.0 5.0 5.0
Internal connection diagram
Voltage regulator
Amp.
1 1 VCC
2 2 VO
3 GND
3
Slit width
2-0.5
+
-
0.1
0.2
g
32
1
5.4 1.0
2.4
3.4 5.4 1.0
*Unspecified tolerances shall be as follows;
Dimensions(d) Tolerance
d<=6.0 ± 0.15
6.0< d<=14.0 ± 0.2
14.0<= d
± 0.3
*( ) : Reference dimensions
g JAPAN AMP made connector
No.171825-3
Recommended connector on
the inserted side
172053-3, etc. ^gg
4.0 _{2 - 0.9}
gg Recommended connecters on the inserted side
are shown on the page after next
*“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
s Absolute Maximum Ratings
(Ta = 25˚C )
Parameter
Supply voltage
*1_{Output voltage}
*2_{Low level output current}
*3_{Operating temperature}
*3_{Storage temperature}
Symbol
Rating
Unit
VCC
- 0.5 to + 10
V
VO
- 0.5 to + 28
V
I OL
50
mA
Topr
- 25 to + 90
˚C
Tstg
- 40 to + 90
˚C
*1 Collector-emitter voltage of output transistor
*2 Collector current of output transistor
*3 The connector should be plugged in/out and the unit's hook should be used at normal temperature.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”