GP1A50HRJ00F Datasheet, PDF (1/12 Pages) Sharp Electrionic Components – Gap : 3mm, Slit : 0.5mm OPIC Output Case package Transmissive Photointerrupter

GP1A50HRJ00F
GP1A50HRJ00F
Gap : 3mm, Slit : 0.5mm
*OPIC Output
Case package Transmissive
Photointerrupter
■ Description
GP1A50HRJ00F is a standard, OPIC output, trans-
missive photointerrupter with opposing emitter and de-
tector in a case, providing non-contact sensing. For this
family of devices, the emitter and detector are inserted in
a case, resulting in a through-hole design.
The case is unique because it uses additional screw
fixing holes, on both sides 3.2mm diameter, and the
shape prevents miss-orientation.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : Printer, FAX, Optical storage unit
■ Features
1. Transmissive with OPIC output
2. Highlights :
• Verical Slit for alternate motion detection
• Output Low Level at intercepting optical path
• Includes additional screw fixing holes
3. Key Parameters :
• Gap Width : 3mm
• Slit Width (detector side) : 0.5mm
• Package : 25×10×6 mm
4. Lead free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A03501EN
1
Date Oct. 3. 2005
© SHARP Corporation