GP1A50HR Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – OPIC Photointerrupter

GP1A50HR/GP1A51HR/GP1A52HR/GP1A53HR
GP1A50HR/GP1A51HR
GP1A52HR/GP1A53HR
OPIC
Photointerrupter
s Features
1. High sensing accuracy ( Slit width : 0.5mm )
2. LSTTL and TTL compatible output
3. Both-sides mounting type : GP1A50HR (Gap: 3mm )
Either-side mounting type : GP1A51HR (Gap: 3mm )
PWB mounting type : GP1A52HR (Gap: 3mm )
GP1A53HR (Gap: 5mm )
s Outline Dimensions
GP1A50HR
19.0 ^{± 0.2}
s Applications
1. OA equipment, such as printers, facsimiles,
etc.
2. VCRs
*“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
GP1A51HR _2.0
(Unit : mm )
2 - φ 3.2 ^{± 0.2}
25.0 ^{± 0.3}
12.2 ^{± 0.3}
3.0
+
-
0.2
0.1
2 - C2.0
Slit width
0.5
(Both sides of
emitter and
detector )
12.2 ^{± 0.3}
3.0
+
-
0.2
0.1
(Both sides of
emitter and
5.0 detector )
0.5
2- φ 3.2 ^{± 0.2}
Slit width
5-
0.4
+
-
0.3
0.1
(1.5)
(9.2)
23
1 45
Marking : ^1A50HR
GP1A52HR
12.2 ^{± 0.3}
3.0
+
-
0.2
0.1
5
-
0.4
+
-
0.3
0.1
(1.5)
(9.2)
5
1
4
3
2
(1.27)
5
-
0.45
+
-
0.3
0.1
(1.27)
*Unspecified tolerances shall be as follows:
Dimensions(d) Tolerance
d<=6.0 ± 0.1
6.0< d<=18.0 ± 0.2
18.0< d<=25.0 ± 0.025
*( ) : Reference dimensions
5.0
0.5
Slit width
(Both sides
of emitter
and detector)
C1.0
(1.27)
5
-
0.45
+
-
0.3
0.1
(1.27)
*Unspecified tolerances shall be as follows:
Dimensions(d) Tolerance
d<=6.0 ± 0.1
6.0< d<=18.0 ± 0.2
*( ) : Reference dimensions
5-
0.4
+
-
0.3
0.1
(1.5)
(9.2)
5
1
4
3
2
GP1A53HR
13.7 ^{± 0.3}
5.0^+-
0.2
0.1
5
-
0.4
+
-
0.3
0.1
(1.5)
(10.3)
5
1
4
3
2
5
-
0.45^+-
0.3
0.1
2 - (1.27)
12.0
18.0
*Unspecified tolerances shall be as follows :
Dimensions(d) Tolerance
d<=6.0 ± 0.1
6.0 < d<=18.0 ± 0.2
*( ) : Reference dimensions
5.2
0.5
Slit width
(Both sides
of emitter
and detector)
C1.0
5
-
0.45
+
-
0.3
0.1
(1.27) (1.27)
*Unspecified tolerances shall be as follows:
Dimensions(d) Tolerance
d<=6.0 ± 0.1
6.0< d<=18.0 ± 0.2
18.0< d<=25.0 ± 0.25
*( ) : Reference dimensions
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”