GP1A44E1 Datasheet, PDF (1/3 Pages) Sharp Electrionic Components – Transmissive Type Photointerrupter with Actuator

GP1A44E1
s Features
1. With compact actuator
2. Easy wiring due to built-in connector
3. Snap-in mounting type in order to
mount to an equipment easily
4. OPIC output type for direct connection
to microcomputer
s Applications
1. Copiers
2. Laser beam printers
3. Facsimiles
GP1A44E1
Transmissive Type
Photointerrupter with Actuator
s Outline Dimensions
15.3 (0.5)
(Unit : mm )
18.0
17.2
(5.0)
1
2
3
g
R0.5
(20 )˚
1.0
0.6
0.2
1.5
12.8
10.8
1.5
Internal connection diagram
Voltage regulator
1
2 ^{15k Ω}
1.5
(5.0)
1 GND
2 V_OUT
3 V_CC
3
Amp
* Tolerance :± 0.3mm
* ( ): Reference dimensions
g DF3A-3P-2DSA made by
HIROSE Japan Co. Ltd.
*“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
s Absolute Maximum Ratings
Parameter
Supply voltage
*1_{Output current}
*2 _{Operating temperature}
*2 _{Storage temperature}
Symbol
VCC
I OL
Topr
Tstg
*1 Collector current of output transistor
*2 The connector should be plugged in/out at normal temperature.
(Ta = 25˚C )
Rating
Unit
- 0.5 to + 10
V
50
mA
- 20 to + 75
˚C
- 40 to + 85
˚C
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”