GP1A10 Datasheet, PDF (1/4 Pages) Sharp Electrionic Components – OPIC Photointerrupter with Connetor

GP1A10/GP1A26LC
GP1A10/GP1A26LC
OPIC Photointerrupter
with Connetor
s Features
1. Uses 3-pin connector teminl
2. Supply voltage range ( VCC : 21 to 26V)
3. High sensig accuracy ( Slit width : 0.5mm )
4. Wide gap between light emitter and detec-
tor ( 5mm )
5. Connector towards upside (GP1A26LC )
s Outline Dimensions
GP1A10
Internal connection diagram
Voltage regulator
1 _{1 GND}
2 _{2 VO}
3 ^{3 V}CC
(3.5)
24.0^{± 0.2}
15.0
5.0
46.0^MAX.
6.0
g
32
1
(15.5)
38.0
f 3.0 ^{± 0.1} 4.0
(2.5) (2.5)
R2.0
4.5
*Unspecified tolerances shall be as follows;
Dimensions(d) Tolerance
d < 6.0 ± 0.2
6.0 <= d
± 0.3
* ( ): Reference dimensions
g JAPAN AMP made
EI 3-pin connector 171826-3
Recommended connectors on the inserted side
JAPAN AMP made
Housing : 171822-3
Terminal : 170262 -1
etc. gg
s Applications
1. Copiers, Printers
2. Facsimiles
GP1A26LC
(3.5)
24.0 ^{± 0.2}
38.0
15.0
5.0
( Unit : mm)
Internal connection diagram
Voltage regulator
1 _{1 GND}
1
2 _{2 VO}
2
3 ^{3 V}CC
3
g
6.0
(15.5)
f 3.0 ^{± 0.1} 4.0
(2.5)
(2.5)
R2.0
4.5
*Unspecified tolerances shall be as follows;
Dimensions(d) Tolerance
d<6.0 ± 0.2
6.0 <=d
± 0.3
* ( ) : Reference dimensions
g JAPAN AMP made
EI 3-pin connector 171825-3
Recommended connectors on the inserted side
JAPAN AMP made
Housing : 171822-3
Terminal : 170262 - 1
etc. gg
* “ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
gg Recommended connectors on the inserted side( See674page ) .
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”