SAJ Datasheet, PDF (1/3 Pages) Sharma Electro Components,Inc – Tantalum Capacitors

Sharma Tantalum Capacitors
RoHS Compliant
SAJ SERIES
INTRODUCTION
The SAJ series Tantalum Chip Capacitors cover a wide range of values and applications. The Extended range
of this series cover higher capacitance values in smaller case sizes. Also included are low profile capacitors
developed for special applications where height is critical.
FEATURES:
• ^{HIGH SOLDER HEAT RESISTANCE - 269°C, 5 TO 10 SECS.}
• ^{ULTRA COMPACT SIZES IN EXTENDED RANGE (BOLD PRINT) ALLOWS HIGH DENSITY}
COMPONENT MOUNTING.
• LOW PROFILE CAPACITORS WITH HEIGHT 1.2MM MAX (A2 & B2) AND 1.5MM MAX (C2) FOR USE ON
PCB’S, WHERE HEIGHT IS CRITICAL.
• COMPONENTS MEET IEC SPEC QC 300801/US0001 AND EIA 535BAAC. REEL PACKING STDS- EIAJ
RC-1009B /EIA 481/IEC 286-3.
• EPOXY MOLDED COMPONENTS WITH CONSISTENT DIMENSIONS AND SURFACE FINISH.
ENGINEERED FOR AUTOMATIC ONSERTION.
• ^{COMPATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES.}
GENERAL SPECIFICATIONS
CAPACITANCE RANGE: 0.1 µF To 330 µF. VOLTAGE RANGE: 4VDC to 50VDC. CAPACITANCE TOLERANCE: ±20%(M), ±10%(K),
(±5%(J) - UPON REQUEST). TEMPERATURE RANGE: -55 TO +125°C WITH DERATING ABOVE 85°C. ENVIRONMENTAL
CLASSIFICATION: 55/125/56 (IEC68-2). DISSIPATION FACTOR: 0.1 TO 1 µF 4% MAX,1.5 TO 6.8 µF 6% MAX, 10 TO 330 µF 8% MAX.
LEAKAGE CURRENT: NOT MORE THAN 0.01CV µA or 0.5 µA WHICHEVER IS GREATER. FAILURE RATE: 1% PER 1000 HRS.
LIFE TEST DETAILS
CAPACITORS SHALL WITHSTAND RATED DC VOLTAGE APPLIED AT 85°C FOR 2000 HRS OR DERATED DC VOLTAGE APPLIED AT
125°C FOR 1000 HRS. AFTER THE TEST:
1. CAPACITANCE CHANGE SHALL NOT EXCEED ±10% OF INITIAL VALUE.
2. DISSIPATION FACTOR SHALL BE WITHIN THE NORMAL SPECIFIED LIMITS.
3. DC LEAKAGE CURRENT SHALL BE WITHIN 125% OF NORMAL LIMIT.
4. NO REMARKABLE CHANGE IN APPEARANCE. MARKINGS TO REMAIN LEGIBLE.
CASE DIMENSIONS IN MILLIMETERS (INCHES)
CASE
R
A2
A
B2
B
H
C2
C
D2
D
E
EIA/IEC
2012
3216L
3216
3528L
3528
4726
6032L
6032
6045
7343
7343H
(TALLER)
L
2.05 ±0.2
(0.08 ±0.008)
3.2 ±0.2
(0.126 ±0.008)
3.2 ±0.2
(0.126 ±0.008)
3.5 ±0.2
(0.138 ±0.008)
3.5 ±0.2
(0.138 ±0.008)
4.8 ±0.2
(0.189 ±0.008)
5.8 ±0.2
(0.228 ±0.008)
6.0 ±0.3
(0.236 ±0.012)
5.8 ±0.3
(0.228 ±0.012)
7.3 ±0.3
(0.287 ±0.012)
7.3 ±0.3
(0.287 ±0.012)
W
1.3 ±0.2
(0.05 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
2.6 ±0.2
(0.102 ±0.008)
3.2 ±0.2
(0.126 ±0.008)
3.2 ±0.3
(0.126 ±0.012)
4.5 ±0.3
(0.177 ±0.012)
4.3 ±0.3
(0.170 ±0.012)
4.3 ±0.3
(0.170 ±0.012)
H
1.2 ±0.2
(0.047 ±0.008)
1.2 ±0.2
(0.047 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.2 ±0.2
(0.047 ±0.008)
1.9 ±0.2
(0.075 ±0.008)
1.8 ±0.2
(0.071 ±0.008)
1.5 ±0.2
(0.059 ±0.008)
2.5 ±0.3
(0.098 ±0.012)
3.1 ±0.3
(0.122 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
4.0 ±0.3
(0.158 ±0.012)
l
0.5 ±0.3
(0.020 ±0.012)
0.7 ±0.3
(0.028 ±0.012)
0.8 ±0.3
(0.032 ±0.012)
0.7 ±0.3
(0.028 ±0.012)
0.8 ±0.3
(0.031 ±0.012)
0.8 ±0.3
(0.032 ±0.012)
0.7 ±0.3
(0.028 ±0.012)
1.3 ±0.3
(0.051 ±0.012)
1.3 ±0.3
(0.051 ±0.012)
1.3 ±0.3
(0.051 ±0.012)
1.3 ±0.3
(0.051 ±0.012)
a
1.2 ±0.1
(0.047 ±0.004)
1.2 ±0.1
(0.047 ±0.004)
1.2 ±0.1
(0.047 ±0.004)
1.8 ±0.1
(0.071 ±0.004)
2.2 ±0.1
(0.087 ±0.004)
1.8±0.1
(0.071 ±0.004)
2.2±0.1
(0.087±0.004)
2.2 ±0.1
(0.087±0.004)
3.1 ±0.1
(0.122 ±0.004)
2.4 ±0.1
(0.095 ±0.004)
2.4 ±0.1
(0.095 ±0.004)
Tel:(949)642-SECI
SECI Engineers & Buyers' Guide
Fax:[phone]