MKT100_1 Datasheet, PDF (1/2 Pages) Sharma Electro Components,Inc – Sharma Film Capacitors

Sharma Film Capacitors
formerly SAHA
MKT 100 SERIES
Formerly MKT 1.60 series
INTRODUCTION:
The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of
values and voltages. These capacitors also have good high frequency characteristics.
In addition to some specific applications such as Blocking, By-passing and Coupling,
this series is widely used in all General Purpose applications.
FEATURES:
Wide value and Voltage range
• _{Flame retardant case and potting}
• _{Consistent dimensions and surface finish due to molded case construction}
•• _{Self healing capability}
GENERAL SPECIFICATIONS:
Dissipation factor: ≤ 0.0150 at 10K Hz for capacitanc e≤ 1.0 µF ≤ 0.0100 at 1 K
Hz for capacitance> 1.0 µFInsulation resistance: For nominal voltage > 100 V
DC, ≥30,000 M Ohms for C≤ 0.33 µF, ≥10,000 seconds for C> 0.33 µF, For
nominal voltag e≤ 100 V DC, ≥10,000 M Ohms for C≤ 0.10 µF, ≥1,000 seconds for
C> 0.10 µF at a temperature of 25 ± 5 °CC. apacitance tolerance: ±5%(J),
±10%(K) and ±20%(M). Voltage Test: 1.6 times the rated voltage applied between
terminals for 2 seconds at a temperature of 25 ± 5 °TCe.mperature range: -55 to
100 °C with derating above 85 °C C. limatic category: F M D
DIMENSIONS
AND
TOLERANCES:
"d" - 0.8 mm (0.032"))
"LL'' - 6.0 ± 1.0mm (0.24 ±
0.04")
Tolerance on "s" ± 0.4mm
(0.016")
PULSE RISE TIME (dv/dt) Volts per µsec.
RATED
VOLTAGE
100
160
250
400
630
1000
LEAD SPACING mm (inches)
100.(0.40) 150.(0.60) 225.(0.89) 275.(1.08)
6
3
2
1
8
5
3
2
11
7
4
3
20
10
5.5
5
30
15
8
7
60
25
15
10
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours. After the test:
1. Capacitance change shall remain within ±5%.
2. Dissipation Factor shall be within 1.5 times the original limits.
3. Insulation Resistance shall be above 50% of the initial limits.
4. There shall be no remarkable change in the appearance and the marking shall remain legible.
Case Dimensions in Millimeters 100V • 160V• 250V• 400V• 630V• 1000V
Voltage
Cpa Value
in µF
0.001
0.0015
0.0022
0.0033
0.0047
0.0068
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
100 V DC / 63 V AC
Dimesnsion in Millimeters
LH
T
S
13.0 9.0 4.0 10.0
13.0 11.0 5.0 10.0
18.0 11.0 5.0 15.0
18.0 11.0 5.0 15.0
18.0 12.0 6.0 15.0
18.0 13.5 7.5 15.0
26.5 16.0 7.0 22.5
26.5 17.0 8.5 22.5
26.5 18.5 10.0 22.5
32.0 20.0 11.0 27.5
32.0 22.0 13.0 27.5
160 V DC / 90 V AC
Dimesnsion in Millimeters
LH
T
S
13.0 9.0 4.0 10.0
13.0 11.0 5.0 10.0
13.0 11.0 5.0 10.0
18.0 11.0 5.0 15.0
18.0 12.0 6.0 15.0
18.0 13.5 7.5 15.0
18.0 14.5 8.5 15.0
26.5 17.0 8.5 22.5
26.5 18.5 10.0 22.5
32.0 20.0 11.0 27.5
32.0 22.0 13.0 27.5
250 V DC / 160 V AC
Dimesnsion in Millimeters
LH
T
S
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
18.0 11.0 5.0 15.0
18.0 11.0 5.0 15.0
18.0 11.0 5.0 15.0
18.0 12.0 6.0 15.0
26.5 15.0 6.0 22.5
26.5 16.0 7.0 22.5
26.5 17.0 8.5 22.5
32.0 17.0 9.0 27.5
32.0 20.0 11.0 27.5
32.0 22.0 13.0 27.5
400 V DC / 200 V AC
Dimesnsion in Millimeters
LH
T
S
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 11.0 5.0 10.0
18.0 11.0 5.0 15.0
18.0 11.0 5.0 15.0
18.0 12.0 6.0 15.0
18.0 13.5 7.5 15.0
26.5 15.0 6.0 22.5
26.5 16.0 7.0 22.5
26.5 17.0 8.5 22.5
32.0 17.0 9.0 27.5
32.0 20.0 11.0 27.5
630 V DC / 220 V AC
Dimesnsion in Millimeters
LH
T
S
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 11.0 5.0 10.0
13.0 12.0 6.0 10.0
18.0 11.0 5.0 15.0
18.0 12.0 6.0 15.0
18.0 13.5 7.5 15.0
26.5 15.0 6.0 22.5
26.5 16.0 7.0 22.5
26.5 17.0 8.5 22.5
32.0 20.0 11.0 27.5
32.0 22.0 13.0 27.5
1000 V DC / 250 V AC
Dimesnsion in Millimeters
LH
T
S
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 9.0 4.0 10.0
13.0 11.0 5.0 10.0
13.0 12.0 6.0 10.0
18.0 11.0 5.0 15.0
18.0 11.0 5.0 15.0
18.0 13.5 7.5 15.0
26.5 15.0 6.0 22.5
26.5 15.0 6.0 22.5
26.5 16.0 7.0 22.5
26.5 18.5 10.0 22.5
32.0 20.0 11.0 27.5
32.0 22.0 13.0 27.5
Tel:(949)642-SECI SECI Engineers & Buyers' Guide Fax:[phone]