MKT050 Datasheet, PDF (1/2 Pages) Sharma Electro Components,Inc – Film Capacitors

Sharma Film Capacitors
formerly SAHA
MKT 050 SERIES
Formerly MKT 1.85 series
INTRODUCTION
The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm
lead spacing. This series covers a wide range of values and voltages and exhibit excellent
high frequency characteristics. In addition to specific applications such as Blocking, By-
passing and Coupling, this series is widely used in all General Purpose applications.
FEATURES
• ^{Wide value and Voltage range}
• ^{Ultra miniature size}
• ^{Flame retardant case and potting}
• ^{Consistent dimensions and surface finish due to molded case construction}
• ^{Available in tape & reel form for automatic insertion}
• ^{Self healing capability}
GENERAL SPECIFICATIONS:
Dissipation factor: For capacitance ≤ 0.1 µF = 0.010 max at 1 KHz, 0.015 max at 10 KHz,
0.030 max at 100 KHz. For capacitance > 0.1 µF = 0.0010 max at 1 KHz, 0.0015 max at
10 KHz. Insulation resistance: For nominal voltage < 100 V DC; ≥10,000 M Ohms
for C ≤ 0.10 µF, ≥1,000 seconds for C > 0.10 µF. For nominal voltage ≤ 100 V DC; ≥ 30,000
M Ohms for C ≤ 0.10 µF, ≥1,000 seconds for C> 0.10 µF at a temperature of 25 ± 5 °C.
Capacitance tolerance: ±5%(J), ±10%(K) and ±20%(M) Voltage Test: 1.6 times the rated
voltage applied between terminals for 2 seconds at a temperature of 25 ± 5 °C
Temperature range: -55 to 100 °C with derating above 85 °C Climatic category: F M D
DIMENSIONS
AND
TOLERANCES:
"d"= 0.5 to 0.6mm
(0.020 to 0.024")
for dimension
“T”≤ 3.5mm
(0.138”)
"d"=0.6 mm (0.024")
for dimension “T” >3.5mm (0.138”)
"LL'' = 4.0 +1.5mm (0.16 +0.06") for Bulk Supply
PULSE RISE TIME (dv/dt) Volts per µsec.
RATED
VOLTAGE
Capacitance
RangeµF
dv/dt
value
50
0.001-1.0
4
63
0.001-1.0
8
100
>0.0068
10
100
0.0033-0.0068
15
100
>0.0033
30
250
0.001-1.0
20
400
0.001-1.0
40
LIFE TEST DETAILS:
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 °C for 1000 hours.
1. Capacitance change shall remain within ±5%.
2. Dissipation Factor shall be within 1.5 times the original limits.
3. Insulation Resistance shall be above 50% of the initial limits.
4. There shall be no remarkable change in the appearance and the marking shall remain legible.
After the test:
Taping Dimensions for MKT 050 Series (5mm Pitch)
DESCRIPTION
DIMENSION
TOLERANCES
mm
Inches
mm
Inches
d Lead wire dia.
0.5 to 0.6 0.020 to 0.024 ±0.05
±0.002
P Tapingpitch
12.7
0.500
±1
±0.039
P0 Sprocketholepitch
12.7
0.500
±0.2
±0.008
P1 Centeringofleadwire
3.85
0.152
±0.7
±0.028
P2 Centering of the body
6.35
0.250
±1.3
±0.051
p Lead spacing
5
0.197
+0.6/ -1.1 +0.024/ -0.043
dS Component alignment
0
0.000
±2
±0.079
H Height from Sproket
16.0, 16.5 0.630, 0.650
±0.5
±0.020
Center to component body
or 18.5
or 0.728
W Tape width
18
0.709
+1.0/ -0.5 +0.039/ -0.020
W 0 Width of adhesive tape
6 min.
0.236 min.
W 1 Sprocketholealignment
9
0.354
±0.5
±0.020
D0 Positionholediameter
4
0.157
±0.2
±0.008
t Tape thickness
0.7
0.028
±0.2
±0.008
Packaging Specifications
Bulk, Tape/Reel & Ammo Pack
BOX SIZE
TxHxL
2.5 x 6.5 x 7.2
3.0 x 6.5 x 7.2
3.5 x 7.5 x 7.2
4.5 x 9.5 x 7.2
5.0 x 10.0 x 7.2
6.0 x 11.0 x 7.2
7.2 x 13.0 x 7.2
BULK
CARTON
3000
3000
2000
1500
1000
2000
1500
TAPED
REEL PACK AMMO PACK
2500
3500
2100
2900
1800
2500
1400
1900
1200
NA
1000
NA
800
NA
TEL:(949)642-SECI SECI Engineers & Buyers' Guide FAX:[phone]