124-XXX Datasheet, PDF (1/1 Pages) Sharma Electro Components,Inc – Formerly sold as RS Components

M SERIES
Formerly sold as RS Components 124-XXX Series
MICA CAPACITORS
INTRODUCTION
SAHA Mica capacitors have been designed to meet the exacting physical, electrical and environmental
requirements of the MIL-C-5 and RS-153 specifications. Careful selection of raw materials, starting with
the finest available grade of India Ruby Mica, and the constant monitoring of all equipment and
processes, provides an overall uniform level of quality consistent with today's most sophisticated
electronic equipment. Ideal for Tuning, Timing, Filtering and Coupling Circuits.
FEATURES
• ^{Low loss and high stability}
• ^{Available in very close tolerances}
• ^{Suitable for precision applications}
• ^{Wide range of operating temperature}
GENERAL SPECIFICATIONS
CAPACITANCE RANGE: 2.2 pF to 10,000 pF VOLTAGE RATING: 350 V DC (Higher voltage
capacitors can also be custom made) TEMPERATE RATING: - 55 to + 100 °C
CASE SIZES: M 6 to M 50 INSULATION RESISTANCE: 50,000 M Ohms minimum at 25°C for
capacitance up to 10,000 pF. DISSIPATION FACTOR: <0.1 at 1 M Hz for values between 100 to
1,000 pF <0.2 at 1K Hz for values above 1,000 pF Please refer to characteristic curve for values
above the range.
LIFE TEST DETAILS:
Capacitors shall withstand 1.5 times the rated DC voltage at 85 °C for 2000 hours. After the test:
1. Capacitance change shall not exceed 1% of the initial value or 1 pF, which ever is greater.
2. Dissipation Factor shall be within 1.5 times the original limits.
3. Insulation Resistance shall meet the initial specified requirements.
4. There shall be no remarkable change in the appearance and the marking shall remain legible.
DIMENSIONS:
LL = 6.3 mm (0.25”) min.
Note:
Please refer to DM series for
Marking details, Temperature
coefficient, General technical
information and characteris-
tic curves, etc.
Case Dimensions in
Millimeters
TYPE
M-6
M - 12
M - 37
M - 50
CAPACITANCE
VALUE in pF
22 - 68
82 - 220
270 - 560
680 - 10000
Lmax.
12.70
16.50
27.00
27.00
Dimensions in Millimeters
W max. T max R max. B +1.0mm C +1 mm
8.00 3.60 2.00
8.00
0.50
11.50 3.80 2.50
12.00
0.50
17.00 3.80 3.00
19.50
0.60
22.00 3.80 3.00
19.50
0.60
Case Dimensions
in Inches
TYPE
M-6
M - 12
M - 37
M - 50
CAPACITANCE
VALUE in pF
22 - 68
82 - 220
270 - 560
680 - 10000
Lmax.
0.50
0.65
1.06
1.06
Dimensions in Inches
W max. T max R max. B +0.04"
0.31 0.14 0.08
0.31
0.45 0.15 0.10
0.47
0.67 0.15 0.12
0.77
0.87 0.15 0.12
0.77
C +0.04"
0.02
0.02
0.02
0.02
Tel: [phone] Fax: [phone] SECI Engineers & Buyers Guide- M Type Mica
1