SGM9148 Datasheet, PDF (4/10 Pages) SG Micro Corp – 5th-Order Video Driver

SGM9148
13MHz, 5th-Order Video Driver
with 6dB Gain
ELECTRICAL CHARACTERISTICS
(At V_CC = 5V, T_A = +25℃, at R_L = 150Ω connected to GND, V_IN = 1V_PP and C_IN = 0.1μF, output AC-coupled, referenced to 400kHz,
unless otherwise noted.)
PARAMETER
INPUT CHARACTERISTICS
Output Level Shift Voltage (V_OLS)
Input Voltage Clamp (V_CLAMP)
Clamp Charge Current
Clamp Discharge Current
Voltage Gain (A_V)
OUTPUT CHARACTERISTICS
Output Voltage High Swing
Output Short-Circuit Current (I_SC)
POWER SUPPLY
Operating Voltage Range
Power Supply Rejection Ratio (PSRR)
Quiescent Current (I_Q)
Supply Current when Disabled
DYNAMIC PERFORMANCE
-0.1dB Bandwidth
-1dB Bandwidth
-3dB Bandwidth
Filter Response (Normalized Gain)
Slew Rate
Differential Gain Error (DG)
Differential Phase Error (DP)
Group Delay Variation (D/DT)
Fall Time
Rise Time
POWER-DOWN DISABLE
DISABLE (Logic-Low Threshold)
DISABLE (Logic-High Threshold)
CONDITIONS
V_IN = 0V, No load
I_IN = - 3.5mA
V_IN = V_CLAMP - 100mV
V_IN = 500mV
R_L = 150Ω
V_IN = 3.0V, R_L = 150Ω to GND
V_IN = 1.5V, Out shorted to GND through 36Ω
V_IN = 0.5V, Out shorted to V_CC through 36Ω
V_CC = 3.5V to 5.0V
V_IN = 0.5V
DISABLE = 0V
f_IN = 27MHz
2V Output step, 80% to 20%
DC-DC coupled
AC-AC coupled
DC-DC coupled
AC-AC coupled
Difference between 400kHz and 6.5MHz
2V Output step, 80% to 20%
2V Output step, 80% to 20%
V_CC = 5V
V_CC = 5V
MIN
TYP
MAX
UNITS
290
550
mV
-210
mV
-4.8
mA
1.8
µA
5.6
6
6.4
dB
4.74
V
91
mA
-102
3
5.5
V
50
dB
5
8.8
mA
0.1
18
μA
10
MHz
11.5
MHz
13
MHz
30
dB
60
V/µs
0.65
%
1.15
1
°
1.5
6
ns
20
ns
20
ns
0.4
V
1.4
V
SG Micro Corp
4
www.sg-micro.com