SGM812_15 Datasheet, PDF (4/12 Pages) SG Micro Corp – Microprocessor Supervisory

SGM811/812
Microprocessor Supervisory
with Manual Reset Input
ELECTRICAL CHARACTERISTICS
(V_CC TYP = 5V for L/M/J Models, 3.3V for T/S Models, 3V for R Models, 2.5V for Z Models, 1.8V for X Models; unless otherwise
noted.)
PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
RESET/ RESET OUTPUT VOLTAGE
Low (SGM811R/S/T/Z/X)
Low (SGM811L/M/J)
Low (SGM811R/S/T/Z/X/L/M/J)
High (SGM811R/S/T/Z/X)
High (SGM811L/M/J)
Low (SGM812R/S/T/Z/X)
V_CC = V_TH(MIN), I_SINK = 1.2mA
V_CC = V_TH(MIN), I_SINK = 3.2mA
VCC > 1.0V, ISINK = 50μA
VCC > VTH(MAX), ISOURCE = 500μA
V_CC > V_TH(MAX), I_SOURCE = 800μA
V_CC = V_TH(MAX), I_SINK = 1.2mA
0.8 × VCC
V_CC - 1.5
0.3
V
0.4
V
0.3
V
V
V
0.3
V
Low (SGM812L/M/J)
VCC = VTH(MAX), ISINK = 3.2mA
0.4
V
High (SGM812 R/S/T/Z/X/L/M/J)
1.8 V < VCC < VTH(MIN), ISOURCE = 150μA
0.8 × VCC
V
SG Micro Corp
4
www.sg-micro.com