SGM3699 Datasheet, PDF (4/10 Pages) SG Micro Corp – 0.5Ω, Low Voltage Quad, SPDT Analog Switch

ELECTRICAL CHARACTERISTICS
(V₊ = +2.7 to +3.6V, GND = 0V, V_IH = +1.6 V, V_IL = +0.4V, T_A = - 40°C to +85°C. Typical values are at V₊ = +3.0V, T_A = + 25°C, unless
otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
ANALOG SWITCH
Analog Signal Range
VNO, VNC, VCOM
On-Resistance
On-Resistance Match Between
Channels
RON
∆RON
V₊ = 2.7V, VNO or VNC = 1V,
ICOM = -100 mA, Test Circuit 1
V₊ = 2.7V, VNO or VNC = 1V,
ICOM = -100 mA, Test Circuit 1
On-Resistance Flatness
RFLAT(ON)
V₊ = 2.7V, VNO or VNC = 1V,
ICOM = -100 mA, Test Circuit 1
TEMP
MIN TPY MAX UNITS
- 40°C to +85°C 0
V+
V
+25°C
0.6 0.9 Ω
- 40°C to +85°C
+25°C
- 40°C to +85°C
+25°C
1Ω
0.15 0.2 Ω
0.15 0.24 Ω
0.05 0.15 Ω
- 40°C to +85°C
0.1 0.2 Ω
Source OFF Leakage current
INC(OFF), INO(OFF) ^{V+ = 3.6V, VNO or VNC = 3.3V / 0.3V,}
VCOM = 0.3V/ 3.3V
Channel ON Leakage current
INC(ON), INO(ON),
ICOM(ON)
DIGITAL INPUTS
Input High Voltage
Input Low Voltage
VINH
VINL
Input Leakage Current
IIN
DYNAMIC CHARACTERISTICS
V₊ = 3.6V, VCOM = 0.3V/ 3.3V,
VNO or VNC = 0.3V/ 3.3V, or floating
V₊ = 2.7V, VIN = 0 or 2.7V
Turn-On Time
Turn-Off Time
Charge Injection,
Break-Before-Make Time
Delay
Off Isolation
Channel-to-Channel Crosstalk
Bandwidth –3 dB
Channel ON Capacitance
tON
V+ = 3.3V, VCOM = 2.0V,
tOFF
RL = 50Ω, CL = 35pF, Test Circuit 2
Q
CL = 1.0nF, VG = 0V, RG = 0Ω
Test Circuit 3
tD
VNO or VNC = 1.5V, RL = 50Ω,
CL = 35pF, Test Circuit 4
Signal = 0dBm,VNO or
f = 100kHz,
OISO
VNC centered between V+
and GND，RL = 50Ω,
f = 1MHz,
Test Circuit 5
XTALK
Signal = 0dBm,
Test Circuit 6
f = 1MHz,
f = 10MHz,
BW
Signal = 0dBm, Test Circuit 7
CNC(ON), CNO(ON),
CCOM(ON)
f = 1MHz
- 40°C to +85°C
1
- 40°C to +85°C
1
- 40°C to +85°C 1.5
- 40°C to +85°C
0.4
- 40°C to +85°C
1
+25°C
54
+25°C
38
+25°C
26
+25°C
12
+25°C
-75
+25°C
-55
+25°C
-103
+25°C
-65
+25°C
70
+25°C
80
µA
µA
V
V
µA
ns
ns
pC
ns
dB
dB
MHz
pF
Specifications subject to changes without notice.
４
SGM3699